ข้ามไปยังเนื้อหา
Function Valves (ฟังก์ชันวาล์ว)
AIRTEC Function Valves. As a leader in the field of pneumatics production, Airtec electrically operated Valves can offer you a broad array of pneumatic control components, including: single/double-acting pneumatic cylinders, valve terminals, rodless cylinders, directional control valves and control elements, as well as many other components and accessories.
products
Series PE
- Adjustable diaphragm pressure switch. The pressure switch is pre-adjusted at 4 bar and is adjustable within the pressure range. The protective cup (PE-18) and plug connector (PE-14) are included.
- SKU # PE-18-01-40, PE-14-01-40
Series DR
- This valve is used for the speed control of a pneumatic cylinder. The flow rate can be regulated by turning the adjusting screw.
- SKU # DR-10, DR-14, DR-18, DR-25
Series AN
- Output signal at port 2 is present if both inlets 12 and 14 are pressurized.
If both pressures are different (min. 0.2 bar), the lower pressure is switched to 2. - SKU # AN-25, An-18
Series SZS
- The valve operates after two input signals at 12 arriving within 0.5 s.
- The valve is actuated as long as the signals continue.
- If the input signals do not arrive within 0.5 s, the valve does not operate.
- Both signals must be reset before the valve switches back on.
- SKU # SZS-14-510
Series SUZ
- The valve is interrupting a permanent pneumatic signal and provides an impulse.
- The duration of the impulse is adjustable.
- SKU # SUZ-18-210-H, SUZ-18-310-H
Series SZ
- The valve operates after two input signals at 12 arriving within 0.5 s.
- The valve is actuated as long as the signals continue.
- If the input signals do not arrive within 0.5 s, the valve does not operate.
- Both signals must be reset before the valve switches back on.
- SKU # SZ-18-31-, SZ-14-510, SZ-18-310
Series SU
- 3/2-way one-shot valve. It converts a continuous pneumatic signal into a 0.3 s pulse.
- SKU # SU-25-310
Series VZ
- This valve may be used either normally open or normally closed.
- Normally closed: pressure inlet port 1 (P).
- Normally open: pressure inlet port 3 (R).
- SKU # VZ-25-310, VZ-18-310, VZ-18-310-20
Series OR
- Output signal is present if one inlet is pressurized. The higher input signal (min. difference 0.2 bar) is dominant.
- SKU # OR-25, OR-18, OR-14-01
Series SE
- A quick exhaust valve is used to increase the speed of a pneumatic cylinder.
- The flow from the control valve to the cylinder ports is unrestricted. ]
- If valve port 1 is de-pressurized, air is exhausted from 2 to 3.
- SKU # SE-12, SE-14, SE-18
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th