Plunger valve 2/2-way Direct-acting
รุ่น 6013 เป็นวาล์วลูกสูบที่มีการออกฤทธิ์โดยตรง โดยมีการเชื่อมต่อท่อนำสต็อปเปอร์กับลูกสูบเพื่อเสริมความแข็งแรงต่อแรงดันและลดการรั่วไหล มีตัวเลือกวัสดุซีลหลายประเภทที่เลือกใช้ตามความต้องการของการใช้งาน การออกแบบหน้าแปลนแบบเฉพาะของ Burkert (SFB) ทำให้สามารถติดตั้งวาล์วบนท่อร่วมได้อย่างประหยัดพื้นที่ นอกจากนี้ยังมีคอยล์ Kick and Drop ที่ช่วยลดการใช้พลังงานไฟฟ้าในระหว่างการทำงาน
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 6013 สามารถใช้ได้ร่วมกับ
General Technical Data | Burkert - Type 6013
Product Properties | ||
Dimensions | Detailed information can be found in chapter “6. Dimensions” on page 9. | |
Seal Material | FKM, PTFE/Graphite (EPDM on request) | |
Body Material | Brass, stainless steel 1.4305 | |
Orifice | DN 2.0...DN 6.0 | |
Circuit Function | A and B | |
Thermal insulation class of solenoid coil | Polyamide class B / Epoxy class H | |
Performance data | ||
Duty cycle/single valve with block assembly on manifold | 100 % continuous rating Intermittent operation 60 % (30 min) or with 5 W coil (on request) | |
Electrical data | ||
Standard version | 24 V DC, 24 V/50 Hz, 230 V/50 Hz | |
Analytical version | 24 V DC, 230 V/50 Hz (other voltages on request) | |
Voltage tolerance | ± 10% | |
Medium data | ||
Operating medium Standard version | Technical vacuum, neutral gases and liquids (e.g. compressed air, water, hydraulic oil) | |
Analytical version | Neutral medium, which does not attack the body and seal materials | |
Medium temperature | ||
With FKM | - 10 °C…+ 100 °C (PA coil), -10 °C…+ 120 °C (Epoxy coil) | |
With PTFE/Graphite | 40 °C…+ 180 °C | |
Analytical version | 24 V DC, 230 V/50 Hz (other voltages on request) | |
With FKM, circuit function B | 10 °C…100 °C (AC),…10 °C…120 °C (DC) | |
Viscosity | Max. 21 mm²/s | |
Process/Port connection & communication | ||
Electrical connection | Tag connector acc. to DIN EN 175301-803 Form A for cable plug Type 2518 (see “10.5. Order-ing chart accessories” on page 20) ATEX/IECEx version with 3 m moulded cable | |
Port connection | ||
Standard version | G ⅛, G ¼, G ⅜, sub-base (SFB) | |
Analytical version | G ⅛, G ¼ | |
Approvals and certificates | ||
Degree of protection | IP65 with cable plug, ATEX/IECEx junction box version and cable connection version | |
Environment and installation | ||
Installation position | As required, preferably with actuator upright | |
Installation instructions | No oils, fats or silicone to be used during installation | |
Ambient temperature (max.) | + 55 °C |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th