โซลินอยด์วาล์ว 2/2 ทาง Coil 24V DC Type 6011 ยี่ห้อ Burkert

BURKERT – TYPE 6011 2/2 Way Direct-Acting Plunger Valve

จุดเด่นของ BURKERT – TYPE 6011

Screwed coil system
Simple and quick flange or manifold installation
Quick coupling (push-in fitting) for plug-in hose connections
Direct-acting and compact small-format valve with diameter of up to DN 2.4

Send Email LINE OA

คำอธิบาย

Plunger valve 2/2 way direct-acting

The type 6011 is only available until 6/30/26.
The successor types are (can be a little different because of the update): 7011
Please contact us for a consultation regarding the most suitable successor article for your requirements.

Valve 6011 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. In combination with a cable plug in accordance with industry standard Form B or DIN EN 175301-803 Form C, the valves satisfy protection class IP65.

BURKERT TYPE 6011 สามารถใช้ได้ร่วมกับ

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6011

General Technical Data | Burkert - Type 6011

Product Properties

Dimensions	Detailed information can be found in chapter “4. Dimensions” on page 5.
Seal Material	FKM
Body Material	Standard version: Brass, polyamide (PA), stainless steel 1.4305 / Analytical version: Brass, stainless steel 1.4305
Weight	Ca. 125 g

Performance Data

Duty cycle/single valve when mounted as a block on a manifold	100 % continuous rating / Intermittent operation 60 % (30 min) or with 2 W coil (on request)
Circuit function	A

Electrical Data

Operating voltage – Standard version	24 V DC, 24 V/50 Hz, 110/230 V/50 Hz
Operating voltage – Analytical version	24 V DC, 230 V/50 Hz
Voltage tolerance	±10%

Medium Data

Medium – Standard version	Technical vacuum, neutral gases and fluids (e.g. compressed air, water, hydraulic oil)
Medium – Analytical version	Neutral/aggressive medium that do not attack the body and seal materials
Viscosity	Max. 21 mm2/s
Medium temperature	– 10…+ 100 °C

Approvals and Certificates

Degree of protection

IP65 with cable plug

Process / Port Connection & Communication

Port connection – Standard version	M5, G 1⁄8, sub-base
Port connection – Analytical version	G 1⁄8, sub-base
Electrical connection	DIN EN 175 301 – 803 Form C for cable plug Type 2516 / Industry standard connector Form B for cable plug Type 2507

Environment and Installation

Installation position	As required, preferably with actuator upright
Ambient temperature (max.)	+ 55 °C
Installation instructions	No oil, grease or silicones to be used as installation aids

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.