Direct-acting 2/2 or 3/2-way pivoted armature valve
BURKERT – TYPE 0330 is a direct-acting, media-separated pivoted armature valve. It is available as a 2/2 and 3/2-way variant. As a 3/2-way variant, it can be used as a distributor or mixing valve. Various diaphragm materials and circuit functions are available depending on the actual application. Brass, stainless steel, PEEK and polypropylene bodies are offered. The solenoid coils are moulded with a chemically resistant epoxy. Since the coil system is separated from the medium by a diaphragm, the valve is especially suitable for critical media such as aggressive acids and lyes. The 0330 is equipped with manual override for start-up and testing. To reduce energy demands, all the coils can be delivered with electronic power reduction or as an impulse variant. The switching status can be indicated via position feedback as a binary or NAMUR signal.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 0330 สามารถใช้ได้ร่วมกับ
General Technical Data | Burkert - Type 0330
Product Properties | ||
Dimensions | Detailed information can be found in chapter “4. Dimensions” on page 6. | |
Seal Material | EPDM / FKM / FFKM / NBR | |
Body Material | Brass / Stainless steel (1.4401) / PP (Polypropylene) / PVDF (Polyvinylidene fluoride) | |
Material resistance | More detailed information can be found in our resistance table, “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 5. | |
Weight | Metal body 0.47 kg / Plastic body 0.40 kg | |
Orifice | DN 2...DN 5 | |
Thermal insulation class of solenoid coil | H | |
Electrical data | ||
Voltage tolerance | ±10% | |
Power consumption standard - Frequency AC | Inrush: 30 VA / Hold: 15 VA / Hold: 8 W | |
Power consumption standard - Frequency DC | Cold: 11 W / Warm: 8 W | |
Power consumption Impulse (inrush winding) - Frequency AC | Hold: 20 VA / Hold: 11 W | |
Power consumption Impulse (inrush winding) - Frequency DC | Cold: 11 W / Warm: 8 W | |
Power consumption explosion proof version - Frequency AC / DC | Inrush: 40 W / Hold: 3 W | |
Voltages - Standard version | 24 V 50 Hz, 110 V 50 Hz, 230 V 50 Hz, 120 V 60 Hz, 240 V 60 Hz, 12 V DC, 24 V DC (further voltages on request) | |
Voltages - Explosion proof version | 24 V, 230 V (further voltages on request) | |
Performance Data | ||
Duty cycle with brass and stainless steel | 100% | |
Duty cycle with PP and PVDF | 40 % duty cycle (60 % intermittent operation) in 30 min for 8 W version / 100 % duty cycle for 5 W version | |
Max. cycling rate (explosion proof version) | Medium temperature up to + 70 °C: 20/min / Medium temperature up to + 90 °C: 5/min | |
Switching times standard version - Frequency AC | Opening: 8...15 ms / Closing: 8...15 ms | |
Switching times standard version - Frequency DC | Opening: 10...20 ms / Closing: 10...20 ms | |
Switching times explosion proof version - Orifice 2...4 | Opening: 30 ms / Closing: 40 ms | |
Medium data | ||
Viscosity | Max. 37 mm2/s | |
Operating medium with NBR | Neutral medium such as compressed air, town gas, water, hydraulic oil, oils and fats without additives, oxygen | |
Operating medium with EPDM | Alkalis, acids to medium concentrations, alkaline washing and bleaching lyes | |
Operating medium with FKM | Oxydizing acids and substances, hot oils with additives, salt solutions, waste gases, oxygen | |
Operating medium with FFKM | Aggressive mediums, hot air, hot oils | |
Medium temperature with body material brass or stainless steel | NBR: 0 °C...+ 80 °C / EPDM: - 30 °C...+ 90 °C / FKM: 0 °C...+ 90 °C / FFKM: +5 °C...+90 °C | |
Medium temperature with body material PP or PVDF | NBR: 0 °C...+ 80 °C / EPDM: - 30 °C...+ 80 °C / FKM: 0 °C...+ 80 °C / FFKM: +5 °C...+80 °C | |
Process/Port connection & communication | ||
Electrical connection - Standard version | Pin terminal acc. to DIN EN 175301 - 803 Form A for cable pug Type 2518/2509 (also on request with moulded cable or terminal box) | |
Electrical connection - Explosion proof version | Moulded cable (for more detailed information, refer to the operating manual ACP016), terminal box without safety fuse | |
Port connection | G 1⁄4, NPT 1⁄4, (RC 1⁄4 and G 1⁄8 on request, G 1⁄8 not possible for PP and PVDF) | |
Approvals and Certificates | ||
Standard version - Degree of protection | IP65 with cable plug | |
Explosion proof version - Degree of protection | IP65 | |
Explosion proof version - Type of protection | II 2 G Ex mb IIC T4 Gb / II 2 D EX mb IIIC T130°Db | |
Explosion proof version - Certificate | EPS 16 ATEX 1 111 X / IECEx EPS 16.0049X | |
Environment and installation | ||
Installation position | As required, preferably with actuator upright | |
Ambient temperature (max.) - Standard version | + 55 °C | |
Ambient temperature (max.) - Explosion proof version | + 40 °C |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th