2/2 way ball valve with electric rotary actuator, ball valve in plastic, DN10 – DN50
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Type 8804 Plastic Version:
Product Characteristics |
|
Body material
|
PVC-U, (PP, PVDF, PVC-C on request)
|
Seal material | PTFE/EPDM, (PTFE/FKM on request) |
Cover/Body materials electrical actuator
|
Nylon/PA 6.6
|
Axis/Screws materials electrical actuator |
Stainless steel
|
Gear materials electrical actuator | Stainless steel and PC |
Operating pressure
|
0-10 bar/0-16 bar |
Connection between actuator and ball valve |
Flange according to ISO 5211
|
Duty cycle | According to IEC34 S4=50% |
Degree of protection | IP66 mounted with cable plug |
Actuating times | See Ordering chart |
Limit switches | 4 adjustable (2 for the motor and 2 additional ones for feedback) Max. 250 V AC/5 A |
Electrical Data |
|
Operating voltages
|
15… 30 V AC 50/60 Hz / 12…48 V DC / 100…240 V AC 50/60 Hz / 100…350 V DC |
Voltage tolerance |
± 10 %; at 12…48 V DC the operating voltage must not drop below 11.5 V
|
Electrical connection |
Cable plug acc. to EN175301-803 (supply voltage) included / Cable glands ISO M20
|
Media Data |
|
Media |
Gaseous and liquid media which do not attack the body and seal materials
|
PVC-U media temperature
|
0 °C…+ 60 °C
|
PP media temperature |
+10 °C…+80 °C
|
PVDF media temperature |
0 °C…+ 120 °C
|
Environment and Installation |
|
Ambient temperature
|
– 10 °C…+ 55 °C
|
Rotation angle |
90o (±5°)
|
Installation position |
Do not install actuator with the cover face down (upside down)!
|
Type 8804 Stainless Steel Version:
Product Characteristics |
|
Dimensions
|
Detailed information can be found in chapter “2. Dimensions” on page 4.
|
Body material |
Stainless steel 1.4408
|
Seal material | PTFE |
Material electrical actuator: Cover/Body
|
Nylon/PA 6.6
|
Material electrical actuator: Axis/Screws | Stainless steel |
Material electrical actuator: Gear | Stainless steel and PC |
Connection between actuator and ball valve
|
Flange according to ISO 5211
|
Duty cycle | According to IEC34 S4=50% |
Actuating time |
Detailed information can be found in chapter “5.3. Ordering chart” on page 9
|
Limit switches |
4 adjustable (2 for the motor and 2 additional ones for feedback) / Max. 250 V AC/5 A
|
Electrical Data |
|
Operating voltage Voltage tolerance
|
15…30 V AC 50/60 Hz / 12…48 V DC / 100…240 V AC 50/60 Hz / 100…350 V DC |
Voltage tolerance |
±10% / At 12…48 V DC the operating voltage must not drop below 11.5 V
|
Media Data |
|
Media
|
Gaseous and liquid media which do not attack the body and seal materials
|
Media temperature |
Depending on the used valve and medium pressure, see “4.1. Pressure temperature diagram for stainless steel ball valves” on page 8. The temperature limit values of the actuators are usually lower than those of the valves. Therefore it has to be ensured, that the temperature limits of other system components (like actuators) do not exceed due to a possible heat radiation from the medium.
|
Process/Port Connection & Communication |
|
Port connection
|
Rp 1⁄4” – Rp 21⁄2” Whitworth Thread acc. to DIN EN 10226 – 1 (old DIN 2999) Weld end (on request)
|
Electrical connection | Cable plug acc. to EN175301-803 (supply voltage) included Cable glands ISO M20 |
Environment and Installation |
|
Ambient temperature for Actuator 3003 Standard
|
– 10 °C…+ 55 °C
|
Ambient temperature for Actuator 3003 with electronic emergency reset |
– 10 °C…+ 40 °C
|
Rotation angle
|
90o (±5°)
|
Installation position |
Do not install actuator with the cover face down (upside down)!
|
Degree of protection | IP66 mounted with cable plug |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th