Robolux multiway multiport diaphragm valve, pneumatically operated
This multiway multiport diaphragm valve system is designed for control of ultra pure, sterile, aseptic and steam/CIP fluid paths. It enables optimal sampling, draining or diverting of critical process fluids.
The valve range is based on the patented Robolux technology, where two weirs are placed under one diaphragm. This design eliminates dead legs and will minimize the flow system volume.
The valve body is machined from a single piece of bar stock stainless steel. The high quality diaphragms are available in several different USP class VI approved materials. The valve is operated with compressed air. With the feedback and control hceads the Robolux fits perfectly into Bürkert’s decentralized automation concept.
All valves will be delivered with 3.1 certificate, installation drawing and manual instruction. The valve meets the requirements of protection class IP65 / IP67 according to EN60529
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 2036 สามารถใช้ได้ร่วมกับ
General Technical Data
Product Properties |
|
Dimensions
|
Detailed information can be found in chapter “4. Dimensions” on page 5
|
Body material |
1.4435 stainless steel (316L)
|
Diaphragm material | EPDM (AD), advanced PTFE/EPDM laminated (EK), GYLON®/EPDM laminated (ER) |
Actuator material |
1.4308 stainless steel (CF8)
|
Internal mechanically polished standard surface quality |
Ra≤0.5 μm (ASME BPE SF1) (external Ra≤1.6 μm)
|
Internal electrically polished standard surface quality | Ra≤0.38 μm (ASME BPE SF4 / DIN HE4) (external Ra≤1.6 μm) |
Performance Data |
|
Pilot pressure
|
6…10 bar for RV50/70 6…7 bar for RV110
|
Pilot air ports |
Thread G 1⁄8″
|
Medium Data |
|
Operating medium
|
Natural gases and fluids, extremely pure, sterile, aggressive or abrasive mediums
|
Medium pressure |
Max. 8 bar (dependent on actuator and diaphragm see “5.1. Medium pressure” on page 8).
|
Control medium |
Neutral gases, air
|
EPDM (AD) medium temperature
|
+ 5…+ 130 °C (steam sterilization + 140 °C for 60 min)
|
Advanced PTFE/EPDM laminated (EK) medium temperature |
+ 5…+ 90 °C (not recommended for steam)
|
GYLON®/EPDM laminated (ER) medium temperature |
+ 15…+ 130 °C (steam sterilization + 140 °C for 60 min)
|
Product Connections |
|
Nominal diameter
|
1⁄4″…2″, DN 4…DN 50
|
Welded port connection |
DIN EN ISO 1127 / ISO 4200 / DIN 11866 series B / DIN 11850 series 2 / DIN 11866 series A / DIN EN 10357 series A ASME BPE / DIN 11866 series C
|
Clamp port connection |
DIN 32676 series A (DIN pipe) / DIN 32676 series B (ISO pipe) / ASME BPE
|
Environment and Installation |
|
Installation position
|
See operating manual
|
Ambient temperature | 0…+ 60 °C |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th