Digital Electro-pneumatic positioner for integrated mounting on process control valves
The compact positioner device Type 8692 is optimised for integrated mounting on the pneumatic actuators in the process valve series Type 23xx/2103 and is specially designed for the requirements of a hygienic process environment. The pilot air duct is integrated into the actuator without external piping. The easy operation and the selection of additional software functions are carried out either on a big graphic display with backlight and keypad or via the COMMUNICATOR. The positioner registers the valve position without deterioration via a contact-free, analogue position sensor. The integrated diagnostics function are used to monitor control valve operating conditions. Valve diagnostic messages via status signals are issued in accordance with NE107 (NAMUR) and recorded as historical entries. The housing is easy to clean and features proven IP protection and chemically resistant materials for use in hygienic processing in the food, beverage and pharmaceutical industries. Combined with Bürkert ELEMENT actuators, the pneumatic actuating system enables spring chamber aeration that avoids actuator chamber contamination from the environment.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 8692 สามารถใช้ได้ร่วมกับ
General Technical Data | Burkert - Type 8692
Product Properties |
|
Dimensions
|
Detailed information can be found in chapter “3. Dimensions” on page 6.
|
Housing
|
PPS, stainless steel |
Seals | EPDM |
Cover | PC |
Display operation
|
Graphic display with backlighting and intuitive menu navigation
|
Operating keys operation | Membrane keypad with 4 keys |
Service interface operation | Connected to PC via USB connection |
Configuration tool operation |
Bürkert Communicator / PACTware (only for device versions with PROFIBUS, resp. analogue version with serial interface)
|
Initialization positioner commissioning
|
Automatic by X.TUNE function (automatic adjustment of the positioner)
|
Manual operation of pilot valve commissioning |
In manual mode via push-button on control panel
|
Status display of device and valve status
|
Automatic by X.TUNE function (automatic adjustment of the positioner)
|
Fieldbus communication
|
EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1
|
Digital communication | Bürkert system bus (büS) – based on CANopen |
Position sensor measuring principle
|
Inductive
|
Position sensor position detection module | Contactless (wear-free) analogue position sensor |
Position sensor stroke range for valve spindle | 3…45 mm |
Electrical Data |
|
Operating voltage |
24 V DC ±10%
|
Protection class | UL: NEC Class 2 |
Residual ripple | 3 acc. to DIN EN 61140 (VDE 0140-1) Max.10% |
Power consumption | <5 W |
Digital input
|
1 binary input, 0…5 V = log “0”, 10…30 V = log “1”
|
Digital output | 2 binary output (optional), galvanically isolated |
Current limitation | 100 mA, output will be synchronised when overloaded |
Analogue output | 1 output (optional) / 0/4…20 mA, 0…5/10 V |
Setpoint setting
|
0/4…20 mA and 0…5/10 V
|
Input resistance |
0/4…20 mA: 180 Ω / 0…5/10 V: 19 kΩ
|
Multipole version electrical connection
|
M12, 8 pin resp. 4 or 5 pin acc. to device version (see “4. Device/Process con- nections” on page 8)
|
Cable gland version electrical connection |
2xM16 × 1.5 (cable Ø 5…10 mm) with terminals for cable cross-sections 0.14…1.5 mm2
|
Pneumatic Data |
|
Control medium
|
Neutral gases, air, quality class acc. to ISO 8573-1
|
Dust content
|
Class 7 (< 40 μm particle size) |
Particle density | Class 5 (<10 mg/m3) |
Pressure dew point | Class 3 (<- 20 °C) |
Oil content | Class X (<25 mg/m3) |
Air supply filter
|
Exchangeable
|
Mesh size | ~0.1 mm |
Low air capacity supply pressure
|
0…7 bar |
High air capacity supply pressure | 3…7 bar |
Pilot air ports
|
Threaded port G 1⁄8, stainless steel
|
Single and double acting (Low air capacity)
|
7 lN/min for aeration and ventilation (QNn value acc. to definition at pressure drop from 7 to 6 bar absolute) |
Actuator series/size (Low air capacity) |
Type 23xx, Ø actuator 70/90 mm
|
Single and double acting (High air capacity)
|
130 lN/min for aeration and ventilation (QNn value acc. to definition at pressure drop from 7 to 6 bar absolute) |
Actuator series/size (High air capacity) | Type 23xx, Ø actuator 70/90 mm / Type 27xx, Ø actuator 175/225 mm |
Approvals and Certificates |
|
Conformity
|
EMC directive 2014/30/EU
|
Ignition protection | II 3D Ex tc IIIC T135 °C Dc / II 3G Ex ec IIC T4 Gc |
UL |
cULus certificate: E238179
|
ATEX | II 3D Ex tc IIIC T135 °C Dc / II 3G Ex ec IIC T4 Gc / Certificate: BVS 14 ATEX E 008 X |
IECEx | Ex tc IIIC T135 °C Dc / Ex ec IIC T4 Gc / Certificate: IECEx BVS 14.0009 X |
CCC (China Compulsory Certificate) | For devices with Ex approval |
Environment and Installation |
|
Installation position
|
As required, preferably with actuator in upright position
|
Valve actuator (type, size) | ELEMENT Type 23xx (actuator size Ø70/90/130 mm) / CLASSIC Type 27xx (actuator size Ø175/225 mm) |
Adapter kits
|
Detailed information can be found in chapter “Adapter kits” on page 16.
|
Ambient temperature (max.)
|
-10…+55 oC
|
Degree of protection |
IP65/IP67 acc. to EN 60529, 4X acc. to NEMA 250 Standard
|
Operating altitude | Up to 2000 m above sea level |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th