Burkert – Type 6606 – 2/2 or 3/2 Way Rocker Solenoid Valve with Separating Diaphragm

จุดเด่นของ Type 6606

Flexible design for custom manifold assemblies
For maximum chemical resistance requirements
Normally closed, normally open and universal function
Compact design with 16 mm width and Cv ratings up to 0.058
High back pressure tightness, excellent cleanability and 100 % duty cycle

หมวดหมู่: 2/2 and 3/2 way micro Solenoid Valves, Microfluidic Valves

คำอธิบาย

2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

The direct-acting rocker solenoid valves with isolating diaphragm of Type 6606 (2/2- and 3/2 way) are high quality valves for analytical technology. They have minimal dead volume and internal volume with few crevices making them easy to flush out. The fluid only comes into contact with the body material and the FFKM seal. The heat transfer to the medium is minimal. The fluid path is isolated from the coil by a stainless steel plate. The valves are ideal for dosing, filling, mixing and distributing of small quantities of fluid for medical, analytical and laboratory applications.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6606

BURKERT TYPE 6606 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions	Detailed information can be found in chapter “4. Dimensions” on page 5.
Material
Fluid housing	PEEK, PVDF
Seal	FFKM
Fluid body	Sub-base: starting at 44 µl G ⅛ and NPT ⅛: starting at 100 µl UNF ¼…28: starting at 25 µl Tube connection: starting at 33 µl < 10 µl available on request
Orifice	DN 0.8…DN 1.6
Performance data
Response times	Open: ca. 25 ms (Pressure rise 0…10 %) Closing: ca. 25 ms (Pressure drop 100…90 %)
Electrical data
Operating voltage	12/24 V DC, other voltages are available on request
Voltage tolerance	± 10 %
Power consumption	3.4 W
Duty cycle	100 % continuous rating Manifold mounting: If media or ambient temperatures are above + 40 ºC: intermittent operation 40 % (minimum 10 min)
Medium data
Operating medium	Resistant to neutral and aggressive liquids and gases, see chapter “4.1. Chemical Resistance Chart – Bürkert resistApp” on page 5
Medium temperature	FFKM: + 15 °C…+ 50 °C FKM: – 10 °C…+ 50 °C EPDM: – 10 °C…+ 50 °C (for orifice DN 2.0)
Approvals and certificates
Protection class	IP65 with flying leads and cable plug Type 1054 IP30 with Rectangular plug Type 2505
Process/Port connection & communication
Port connection	Bürkert sub-base (16 × 27 mm) G ⅛ NPT ⅛ UNF ¼… 28 Tube connection
Electrical connection	Plug-in connection C acc. to DIN EN 175301 – 803 for cable plug Type 2516 top/lateral 2 FEP-leads, AWG 24, length 500 mm Rectangular cable plug, Type 2505
Environment and installation
Installation position	As required, preferably with actuator upright
Ambient temperature (max.)	55 °C

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.