ROSS – SERPAR® Crossflow Press Control Double Valves
STANDARD SPECIFICATIONS |
|
Pilot Solenoid | : Two,rated for continuous duty. |
Standard voltages | : 100-110 volts 50 Hz, 100-120 volts, 24, 110, volts DC.Other voltages available. |
Power Consumption | : Each solenoid, 87 VA inrush, 30 VA holding on 50 or 60 Hz ; 14 wtts on DC |
Electrical Connections | : Multipin Connector. |
Ambient Temperature | : 4 to 50 C (40 to 120 F) |
Media Temperature | : 4 to 80 C (40 to 175 F) |
Flow Media | : Filtered air. |
Pressure Range | : 2 to 8.5 bar (30 to 125 psi) |
Ports | : NPT threads. |
.
VALVE OPERATION |
|
Both solenoids must be energized simultaneously to shift the valve; maintained signal required to keep valve shifted. | |
Valve Response Time (msec) = M + F * V average time required to fill volume V (cubic inches) to 90 percent of supply pressure or to exhaust it to 10 percent of supply pressure.M and F values are shown in chart below. See Valve Response Time on page 18. Rating also on page 18. |
.
VALVE MODEL NUMBER (WITH SILENCER) |
||||||||
PORT SIZE | MODEL NUMBER (WITH SILENCER) |
AVERAGE CV. | WEIGHT | DIMENSION | ||||
1 TO 2 | 2 TO 3 | Kg | A | B | C | |||
3/8″ | J3573C3258 | 3.0 | 6.0 | 3.8 | 183 | 205 | 160 | |
1/2″ | J3573C4258 | |||||||
3/4″ | J3573C5258 | 3.0 | 9.0 | 3.8 | 183 | 205 | 160 | |
1″ | J3573A6709 | 3.0 | 9.0 | 3.8 | 218 | 205 | 160 | |
VALVE MODEL NUMBER (WITHOUT MUFFLERS SILENCER) |
||||||||
PORT SIZE |
EXH. PORT |
MODEL NUMBER (WITHOUT SILENCER) |
AVERAGE CV. | WEIGHT | DIMENSION | |||
1 TO 2 | 2 TO 3 | Kg | A | B | C | |||
3/8″ | 1″ | J3573C3257 | 3.0 | 6.0 | 3.5 | 183 | 205 | 117 |
1/2″ | 1″ | J3573C4257 | ||||||
3/4″ | 1″ | J3573C5257 | 3.0 | 9.0 | 3.5 | 183 | 205 | 117 |
1″ | 1″ | J3573A6711 | 3.0 | 9.0 | 3.5 | 218 | 205 | 117 |
(J3573C3258, J3573C4258, J3573C5258, J3573A6709,J3573C3257, J3573C4257, J3573C5257,J3573A6711)
อ้างอิง : rosscontrols.com
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th
You must be logged in to post a comment.