Flowmeter with Paddle Wheel for Continuous Flow Measurement
The Bürkert Type 8012 paddle wheel flow meter is available in magnetic or optical version. The magnetic version of the measuring instrument is especially designed for use with neutral, slightly aggressive, solid free liquids. The optical version is exclusively intended for use with infrared transparent liquids. Type 8012 consists of a fitting ( Type S012) and an electronic module (Type SE12) which are connected together with screw. The Bürkert designed fitting system ensures simple installation into all pipes from DN06…DN65. It can also be integrated in customer-specific block systems. Depending on the electronics module, the 8012 is equipped: – with a pulse output or – with a pulse output and a 4…20 mA current output. The pulse output, which can be transmitted and processed by a Bürkert remote transmitter/controller, generates a configurable frequency proportional to the flow rate or can be used as a switch output.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 6013 สามารถใช้ได้ร่วมกับ
Note: If the device is mounted in a humid environment or outside, then the maximum voltage allowed is 35 V DC instead of 36 V DC.
Product Properties |
|
Non wetted parts – Housing material | PPS |
Non wetted parts – Seal material | EPDM |
Non wetted parts – Screws material | Stainless steel A4 |
Non wetted parts – M12 male fixed plug material | PA |
Non wetted parts – Cable gland with 1 m connected cable (on request) material |
PVC (cable) and PA (cable gland) |
Wetted parts – Fitting material |
Brass, stainless steel 1.4404/316L, PVC or PP
|
Wetted parts – Seal material | FKM (EPDM option) |
Wetted parts – Axis and Bearings material |
Ceramics (Al2O3)
|
Wetted parts – Paddle wheel, holder material | PVDF |
Dimensions |
Detailed information can be found in chapter “4. Dimensions” on page 6.
|
Measuring element
|
Optical – infra-red (or magnetic paddle wheel, on request)
|
Compatibility | Electronic module (Type SE12) compatible with Bürkert fitting (Type S012) |
Pipe diameter |
DN06…DN50 (DN65 on request)
|
Measuring range | Flow rate: 0.5…1000 l/min (0.13…265 gpm) – flow velocity: 0.3…10 m/s |
Performance Data |
|
Measurement deviation
|
Teach-In: ± 1 % of the measured value (at Teach-In flow rate value) / Standard K-factor: ±2.5% of the measured value |
Linearity |
±0.5% of full scale
|
Repeatability | ±0.4% of the measured value |
4…20 mA output uncertainty | ±0.16 mA |
Electrical Data |
|
Operating voltage
|
12…36 V DC ±10%, filtered and regulated Connection to main supply: permanent (through external SELV (Safety Extra Low Volt- age) and LPS (Limited Power Source) power supply) |
Power Source (not supplied) | Limited power source according to UL/EN 60950-1 standards or limited energy circuit according to UL/EN 61010-1 §9.4 |
DC reverse polarity protection | Yes |
Over-voltage protection | Yes |
Current consumption |
< 60 mA (at 12 V DC for current version, without load)
|
Outputs |
Transistor: NPN (default setting) or PNP (configurable on request), open collector
Current: according to version, configurable on request
|
Voltage supply cable
|
1.5 mm2 max. cross-section
|
Medium Data |
|
Fluid temperature
|
With fitting in: • PVC: 0…+ 60 °C (+ 32…+ 140 °F) • PP: 0…+ 80 °C (+ 32…+ 176 °F) • Stainless steel or brass: – 15…+ 100 °C (+ 5…+ 212 °F) (if T°ambient ≤ + 45 °C) or -15…+90 °C (+5…+194 °F) (if +45 °C ≤ T°ambient ≤+60 °C) |
Fluid pressure
|
• Max. PN10 (145 PSI) with plastic fitting • Max. PN16 (232 PSI) with metal fitting Detailed information can be found in chapter “5.1. Pressure temperature diagram” on page 8. |
Viscosity
|
Max. 300 cSt
|
Rate of solid particles | Max. 1% . |
Maximum particle size | 0.5 mm |
Process/Port Connection & Communication |
|
Port connection
|
• Metal: Internal or external thread (weld ends, clamp or flange on request) • Plastic: True union with nut and solvent socket, external thread (spigot on request) |
Electrical connection | Free positionable 5 pin M12 male fixed plug or with 1 m cable via cable gland (on request) |
Approvals and Certificates |
|
Standards: Protection class
|
According to IEC/EN 60529: IP67 with device wired and M12 cable plug mounted and tightened / IP65 (with cable gland)
|
CE directives
|
The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable). |
Pressure equipment directives Certificate | Complying with Article 4, Paragraph 1 of 2014/68/EU directive Detailed information on the pressure equipment directive can be found in chapter “2.1. Pressure Equipment Directive” on page 5. |
Certificate | On request: • Inspection certificate 3.1 (acc. to EN-ISO 10204) • Test report 2.2 (acc. to EN-ISO 10204) • Certification of conformity for the surface quality DIN4762-DIN4768-ISO/4287/1 • 3 points flow calibration certificate • FDA-certificate (only for device with EPDM seal and stainless steel fitting) |
Environment and Installation |
|
Ambient temperature
|
Operation and storage: – 15…+ 60 °C (+ 5…+ 140 °F)
|
Relative air humidity | ≤80%, without condensation |
Height above sea level | Max. 2000 m |
Operating condition |
Continuous
|
Equipment mobility | Fixed |
Application range | Indoor and outdoor (Protect the device against electromagnetic interference, ultraviolet rays and, when installed outdoors, against the effects of climatic conditions) |
Installation category | Category I according to UL/EN 61010-1 |
Pollution degree | Degree 2 according to UL/EN 61010-1 |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th