Direct-acting 2/2 way Plunger Valve
Burkert type 6027 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearing increases the service life with dry gases. Special seal technology is used for high-pressure applications. In combination with a plug-in accordance with DIN EN 175301 – 803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 6027 สามารถใช้ได้ร่วมกับ
General Technical Data | Burkert - Type 6027
Product Properties
Dimensions |
Detailed information can be found in chapter “4. Dimensions” on page 9.
|
Body Material |
Brass or stainless steel 1.4404
|
Coil Material |
Epoxy
|
Nominal Diameter |
DN 1.0…DN 13.0
|
Coil Insulation Class |
Epoxy class H
|
Performance Data
Duty cycle / single valve |
100 % continuous rating
|
Response times AC
|
Opening: 10…30 ms / Closing: 50…80 ms
|
Response times DC
|
Opening: 20…30 ms / Closing: 50…80 ms |
Circuit function
|
A and B
|
Electrical Data
Voltage tolerance |
±10%
|
Voltages
|
24 V/DC, 24 V/50 Hz, 230 V/50 Hz, others on request
|
Medium Data
Operating medium – Standard |
Vacuum, neutral gases and liquids (e.g. compressed air, town gas, natural gas, water, hydraulic oil, petrol) and slightly aggressive medium, Hot liquids and steam
|
Operating medium – Oil burner version (PF15)
|
Heating oil (EL, L, M, S) acc. to DIN 51603 part 1…6, shipping fuels acc. to ISO 8217 Only with stainless steel body: Fatty acid methyl ester (FAME) acc. to DIN EN 14213, rapeseed oil acc. to DIN V 51605
|
Viscosity (max.)
|
21 mm2/sec / 1.6…76 cSt (DN 2, 2 NC 1.6…22 cSt) (Oil burner version PF15) |
Medium temperature – Standard version
|
FKM/FKM: – 10 °C…+ 140 °C / EPDM/EPDM: – 30 °C…+ 120 °C / NBR/NBR: – 10 °C…+ 80 °C / PTFE/FKM: – 10 °C…+ 140 °C / PTFE/PEEK: – 40 °C..+ 180 °C
|
Medium temperature – High pressure version up to 250 bar (MX32) or 160 bar (MX31) |
PEEK/FKM: – 10 °C…+ 80 °C / PEEK/EPDM: – 30 °C…+ 80 °C / PEEK/PEEK: – 40 °C..+ 80 °C
|
Medium temperature – Approval DIN EN 161 (PO19)
|
NBR/NBR: 0 °C…+ 80 °C / FKM/FKM: 0 °C…+ 80 °C
|
Medium temperature – Oil burner version (PF15)
|
0 °C…160 °C
|
Approvals and Certificates
Protection class |
IP65 with cable plug
|
DIN CERTCO registration (Oil burner version PF15)
|
DN 2.2 (NO) Reg. No.: 5S255 / DN 3.0 (NC) Reg. No.: 5S255 / DN 3.5 (NC) Reg. No.: 5S255 / DN 10.0 (NC) Reg. No.: 5S255
|
Process / Port Connection & Communication
Port connection |
G 1⁄4, G 3⁄8, G 1⁄2, G 3⁄8 (NPT and RC on request) / G 1⁄4, G 3⁄8, G 1⁄2, G 1⁄8 (Oil burner version PF15)
|
Electrical connection
|
Acc. to DIN EN 175 301 – 803 Form A for cable plug Type 2508
|
Environment and Installation
Installation position |
As required, preferably with actuator upright
|
Ambient temperature (max.)
|
55 °C / – 15 °C…+ 60 °C (Oil burner version PF15)
|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th