Servo-assisted 2/2-way Diaphragm valve
The 5282 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and circuit functions are available depending on the application. The standard brass body satisfies all European drinking water requirements. The body offering is completed with stainless steel versions. The 3/2-way pilot valve can be easily converted from NC to NO circuit function by rotating it on the armature. The solenoid coils are moulded with a chemically resistant epoxy. The 5282 is equipped with manual override for start-up and testing. NEMA 4X is available on request.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 5282 สามารถใช้ได้ร่วมกับ
General Technical Data | Burkert - Type 2000
Product characteristics | ||
Dimensions | Detailed information can be found in chapter “5. Dimensions” on page 5. | |
Material | ||
Threaded body | Brass according to DIN EN 50930 − 6 DN 13 stainless steel CF3M DN 20…DN 50 stainless steel 1.4581 | |
Flange body | Stainless steel 1.4581 | |
Internal valve parts | Stainless steel, brass | |
Coil | Epoxide | |
Seal | NBR, EPDM, FKM | |
Nominal diameter | DN 13…DN 65 | |
Switching function | Detailed information can be found in chapter “2. Circuit functions” on page 4. | |
Thermal insulation class of solenoid coil | H | |
Performance data | ||
Nominal operating mode | Continuous operation 100 % duty cycle | |
Switching times1.) | Opening: 0.1…0.8 sec. Closing: 1.0…4.0 sec. | |
Electrical data | ||
Operating voltage | 024/DC, 024/56, 230/56, 024/UC, 230/UC | |
Voltage tolerance | ± 10 % | |
Electrical power consumption | ||
Standard | Inrush AC 24 VA Operation AC 14/8 VA W DC cold/hot 11/8 W | |
Ex | Inrush AC 40 VA Operation AC 3 VA W DC cold/hot 40 W inrush / 3 W operation | |
Medium data | ||
Operating medium NBR NBR EPDM FKM | Neutral media, e.g. compressed air, water, hydraulic oil Oil and grease-free media, alkalis, hot water Hot air, per solutions, hot oils | |
Medium temperature NBR EPDM FKM | 0 °C…+ 80 °C - 25 °C…+ 90 °C 0 °C…+ 90 °C | |
Process/Port connection & communication | ||
Electrical connection | ||
Standard | Plug tabs according to DIN EN 175301 - 803 Form A for cable plug Type 2518 | |
Ex | With moulded cable 3 m long, 3 × 0.5 mm2 With moulded cable 3 m long, 3 × 0.5 mWith terminal box | |
Approvals and certificates | ||
Guidelines | CE, EAC | |
Degree of protection | IP65 with cable plug according to DIN EN 175301 - 803 Form A IP65 with cable connection or terminal box | |
Environment and installation | ||
Ambient temperature | Max. + 55 °C | |
Installation position | Any, preferably actuator face up |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th