Direct-acting 2/2-way or 3/2-way Toggle valve
The 0131 valve is a direct-acting toggle valve. A variety of seal material combinations are available depending on the application. Thanks to the diaphragm separation between actuator and fluid housing, aggressive media such as acids and alkaline solutions can also be safely controlled. The assortment is rounded out with plastic housings made of PVC. The solenoids are moulded with a highly resistant chemical epoxy. “Kick and drop” electronics are moulded into all DC solenoid variants for reduced electrical power consumption. An optional electrical position feedback sensor reliably detects the switching position. Conformity with KTW and W270 are available for drinking water applications. Furthermore, versions of type 0131 are available that conform with DIN EN 45545:2016 (standard parts 2 and 5) – fire protection in railway vehicles.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE 0131 สามารถใช้ได้ร่วมกับ
General Technical Data
Dimensions |
Detailed information can be found in chapter “4. Dimensions” on page 8.
|
Seal material | EPDM |
Body material | Brass |
Nominal diameter
|
DN 10…DN 20
|
Circuit function | A and B (Detailed information can be found in chapter “2. Circuit functions” on page 5.) |
Thermal insulation class of solenoid coil | H |
Performance Data
Duty cycle |
100% duty cycle
|
Switching frequency
|
Max. 6/min
|
Switching time |
Open: 10…20 ms / Close: 40…60 ms
|
Electrical Data
Operating voltage |
24 V/UC, 110 V/UC, 230 V/UC; (36 V/UC on request)
|
Inrush power concumption | 100 W |
Hold power consumption |
9 W (after 500 ms)
|
Voltage tolerance
|
±30%
|
Current consumption at 30% increased operating voltage
|
31.2 V =7.60 A / 143.0 V =1.80 A / 299.0 V =0.76 A |
Medium Data
Operating medium | Neutral fluids, e.g. drinking water or neutral gases, e.g. compressed air |
Medium temperature
|
– 30 °C…+ 80 °C |
Viscosity (max.) | 37 mm2/s |
Proces / Port Connection & Communication
Electrical connection |
Cable plug Type 2518 according to DIN EN 175 301 – 803, Form A (included in delivery), see “Cable plug Type 2518, Form A according to DIN EN 175301 – 803” on page 17
|
Approvals and Certificates
Degree of protection |
IP65 with cable plug
|
Environment and Installation
Installation position | Any, preferably actuator face up |
Max. system pressure in flow direction | 8 bar (switching pressure max. 3 bar depending on orifice) |
Ambient temperature | – 30 °C…+ 70 °C |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th