Skip to content
จุดเด่นของ Airtec - Series PE
- Adjustable diaphragm pressure switch. The pressure switch is pre-adjusted at 4 bar and is adjustable within the pressure range. The protective cup (PE-18) and plug connector (PE-14) are included.
จุดเด่นของ Airtec - Series AN
- Output signal at port 2 is present if both inlets 12 and 14 are pressurized.
- If both pressures are different (min. 0.2 bar), the lower pressure is switched to 2.
จุดเด่นของ Airtec - Series DR
- This valve is used for the speed control of a pneumatic cylinder. The flow rate can be regulated by turning the adjusting screw.
จุดเด่นของ Airtec - Series OR
- Output signal is present if one inlet is pressurized. The higher input signal (min. difference 0.2 bar) is dominant.
จุดเด่นของ Airtec - Series SE
- A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve to the cylinder ports is unrestricted. If valve port 1 is de-pressurized, air is exhausted from 2 to 3.
จุดเด่นของ Airtec - Series SU
- 3/2-way one-shot valve. It converts a continuous pneumatic signal into a 0.3 s pulse.
จุดเด่นของ Airtec - Series SUZ
- The valve operates after two input signals at 12 arriving within 0.5 s.
- The valve is actuated as long as the signals continue.
- If the input signals do not arrive within 0.5 s, the valve does not operate.
- Both signals must be reset before the valve switches back on.
- In addition, it has a self- locking device. A signal to 14 actuates the two-signal-control as a standard 5/2-valve.
- When the signal at 14 ends, the valve resets.