Skip to content
Flow measurement การวัดการไหลของอุตสาหกรรม มีความสำคัญมากขึ้นตลอดเวลา เราสร้างผลิตภัณฑ์สำหรับทั้งแอปพลิเคชันมาตรฐานและแอปพลิเคชันที่มีความต้องการและต้องการโซลูชันแบบกำหนดเอง คุณจึงสามารถเลือกเครื่องวัดอัตราการไหลที่เหมาะสมที่สุดกับความต้องการในกระบวนการของคุณได้
Switch
FineTek – SPX Thermal Dispersion Flow Switch
- LED indication of flow status
- Marine certified unit available
- Standard and custom extended insertion lengths
- Maximum operating pressure up to 1,450psi (100bar)
- Choice of NPN/PNP, N.O. or N.C. relay, or SPDT relay output
FineTek – SFX Paddle Type Level Switch
-
1″ PT threaded process connection
- Standard and explosion proof versions
-
SPDT output contact, 60W@220VAC/200VDC rating
-
Field customizable paddle length, 1~3″ (25.4~76.2mm)
- Maximum pressure up to 355psi (25bar) and operating temperature to 302⁰F (150⁰C)
Transmitter
FineTek – EPU Clamp-On Ultrasonic Flowmeter
- High-quality, durable, and reliable.
- IP67 protection level, with waterproof transducer.
- Able to measure both volume and flow rate of liquid.
- Applicable to all types of liquids that without air, sediment or sludge.
- No intrusion in the pipeline during measurement of flow rate, hence no adverse effects will be caused on the pipeline or process liquid.
FineTek – EPD Electromagnetic Flow Meter
- Simple piping design and self diagnosis function.
-
Two measuring points inside tube and no moving parts to prevent pressure losses and pipe blockage.
- Measurement is virtually independent of density, viscosity, temperature, pressure and conductivity.
-
Electric conductive liquid and fluids with low solid contents can also be measured.
FineTek – EPR Paddle Wheel Flow Meter
- Simple piping design and self diagnosis function.
-
Two measuring points inside tube and no moving parts to prevent pressure losses and pipe blockage.
- Measurement is virtually independent of density, viscosity, temperature, pressure and conductivity.
-
Electric conductive liquid and fluids with low solid contents can also be measured.
FineTek – Smart Multi Jet Water Meter EPH series
- The design complies with the design standard of OIML-R49
- Accurate measurement with high sensitivity.
- Compared with B-level meters, C-level meters can measure a lower minimum flow rate. With increased sensitivity, errors are reduced.
- LCD electronic display, able to intuitively measure water cumulative flow rate, has multiple smart management alarm functions, can be connected to an external transmitter to obtain various information such as water analysis data, water leakage etc.
- Uses non-magnetic transmission, therefore will not be affected by external magnetic fields.
- LCD display module displays information such as total cumulative amount, instantaneous flow and operating days.
- Built in lithium battery with high efficiency and lifespan of more than 8 years.
FineTek – Thermodynamic Flowmeter EPT
- Has flow rate and temperature measurement functions.
- Supports Modbus digital communication.
- IP68/IP69K protection level.
- Built-in anti-surge protection.
- There is no wear-and-tear on the mechanical structure.
- Liquids containing impurities can also be detected because there is no mechanical structure.
- The length of the sensor rod can be designed and produced in accordance with the size of the pipe on site.
FineTek – Thermodynamic Flowmeter EPT
- Has flow rate and temperature measurement functions.
- Supports Modbus digital communication.
- IP68/IP69K protection level.
- Built-in anti-surge protection.
- There is no wear-and-tear on the mechanical structure.
- Liquids containing impurities can also be detected because there is no mechanical structure.
- The length of the sensor rod can be designed and produced in accordance with the size of the pipe on site.