Skip to content
Radar Level Measurement
LEVEL
The radar level measuring device consists of a housing containing the electronics, a process connection with an antenna and a sensor. The radar sensor transmits brief radar pulses with a duration of approximately 1 ns from the antenna. These pulses are reflected by the filling material and received by the antenna as echoes. Radar waves are propagated at the speed of light. The delay time of the radar pulses from transmission to reception is proportional to the distance and therefore to the filling level. The filling level determined in this way is converted into a corresponding output signal and issued as a measured value. The filling level sensors are frequently used for aggressive media as well as dynamic process conditions, such as high temperatures or pressure fluctuations. As with the ultrasonic measurement, the measurements in this case are performed without contact. Since no direct contact with the medium is required, the measuring principle is ideal for hygienic applications.
PRODUCT
ACCURA – Radar level transmitter WSR550
- Range: M1-10m, M2-20m, M3-30M, M6-60m, MB-120m
- Can be used in stirring, steam, dust, crystallization occasions
- Abundant physical interfaces: 4~20mA (2 channels optional), HART,AUTBUS
- Fieldbus Foundation, ProfibusPA, NB-IoT, etc.
- Support Bluetooth debugging function
- Support low dielectric constant (less than 1.5) medium TBF tank bottom reflection measurement
- Support backlight display
ACCURA – Radar Level Transmitter
- Non-contact radar technology is characterized by extremely high accuracy. The measurement is influenced neither by fluctuating product features nor by changing process conditions such as temperature, pressure or strong dust generation. The user-friendly adjustment without vessel filling and emptying saves time.
FineTek – JFR3 FMCW Radar Level Transmitter
- Non-contact measurement.
- Able to measure corrosive & toxic liquids, hydrocarbons and slurries.
- Measurement unaffected by specific gravity,temperature,viscosity or foam.
- Echo wave display – resulting in accurate adjustment and parameter setting.
- Measuring range scanning, background noise editing & removal, save function.
FineTek – JFR FMCW Radar Level Transmitter
- Non-contact liquid level measurement
- State-of-the-art FMCW (frequency-modulated-continuous-wave) technology, accuracy as good as ±0.197″ (5mm).
- 4-20mA output, HART available
- 24VDC powered, 4-wire; 2-wire available
Burkert Type 8139 – Radar Level Meter for Liquids Suitable
- Continuous level measurement up to 30 m, 4…20 mA, 2-wire
- Available process connections: Plastic horn antenna, thread (G, NPT ¾ and 1½ ), flange (DN50, DN100), clamp (2″)
- Excellent radar signal focusing and high measurement dynamics
- Adjustable using the display/configuration module and keys, alternatively via PC-Tool with DTM
Burkert Type 8138 – Radar level meter for hygienic applications
- For level measurement up to 35 m
- 4…20 mA/Hart, 2 wires
- Adjustable with display/configuration module or PC
- ATEX approvals
Burkert Type 8137 – Radar Level Meter for Higher Pressure Ranges
- ATEX approvals
- 4…20 mA/Hart, 2 wires
- For level measurement up to 35 m
- Adjustable with display/configuration module or PC
Burkert Type 8136 – Radar Level Meter for Aggressive Media
- ATEX approvals
- 4…20 mA/Hart, 2 wires
- For level measurement up to 20 m
- Adjustable with display/configuration module or PC
- Insensitive to variations of temperature, pressure, medium data of the product and gas layers