Skip to content
SERIES 1303 – 1304 – 1305 – 1306 – 1307 – 1308
Pneumax Cylinders CNOMO-CETOP-ISO Series 1303 – 1304 – 1305 – 1306 – 1307 – 1308
They conform to CNOMO standards, fully complying with CETOP and ISO standards, with mounted fixing devices 32 to 100.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
Cylinders CNOMO-CETOP-ISOConstruction characteristic
End caps | solid aluminium bar up to Ø100, alloy aluminium from Ø125 to Ø200 | |
Rod | C43 chromed steel, by thickness or stainless steel | |
Barrel | oxidised aluminium | |
Tie rods | steel with rolled threads | |
Cushion bearings | aluminium | |
Rod-guide bushing | brass (Ø32, 40, 50) in aluminium with self-lubricating bearings in sinterized bronze for the remaining BOREs | |
Piston | aluminium lathed from bar | |
Seals | Standard: NBR Oil resistant rubber, PUR Piston rod seals (FPM seals available upon request) | |
Operational characteristics
Fluid | filtered and lubricated air - hydraulic oil (with special bushing) | |
Pressure | max. 12 bar (air) - 20 bar (oil) | |
Operating temperature | - 5 °C - +70 °C with 1303-1308 standard seals - 5 °C - +80 °C with FPM seals for 1306-1308 series (magnetic piston) -5 °C - +150 °C with FPM seals for 1303-1305 series (non magnetic piston) | |
Please follow the suggestions below to ensure a long life for these cylinders:
- use clean and lubricated air
- correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod.
- avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device)
- evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.)
Please note: air must be dried for applications with lower temperature.
Use hydraulic oils H class (ISO Vg32) for correct continued lubrication. Our Technical Department will be glad to help.
Standard strokes
Double acting version
From 0 to 150 every 25 mm; from 150 to 500 every 50 mm; from 500 to 1000 every 100 mm (for all bores) On request are available strokes up to 2800 mm
Single acting version
up to stroke 50 mm
PNEUMAX – Cylinders CNOMO-CETOP-ISO Series 1303-1304-1305-1306-1307-1308
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th
