Skip to content
Pressure booster in Technopolymer Ø40
PNEUMAX – ตัวควบคุมแรงดันแบบสัดส่วน SERIES 1700 | Pressure booster ø40 with pressure regulator
It is not unusual that, during some applications the thrust generated by a pneumatic cylinder is not sufficient for the specific purpose it has been designed for.
In order to get over the problem, the working pressure may be increased to a maximum line pressure which normally is 6 – 7 bar; alternatively the problem is solved by an higher bore cylinder that suits the machine.
Three size pressure boosters, with pressure ratio of 2 – 1, have been designed to avoid these problems. This device is utilizing the compressed air of the circuit where it is installed.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
SERIES 1700Technical characteristics
Technical characteristics | ||
Connections | G 1/8" | |
Max working pressure (bar) | Desired outlet pressure + 1 bar | |
Temperature °C | -5 - +50 | |
Nominal orifice diamete (mm) | ø5 | |
Weight (g) | 1600 | |
Assembly position | Any | |
Max. fittings torque (Nm) | 15 | |
Characteristics curves
PNEUMAX – SERIES 1700 | Pressure booster ø40 with pressure regulator
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th
