Skip to content
Pressure booster in Technopolymer Ø40
PNEUMAX – SERIES P+ | Pressure booster in Technopolymer Ø40
In some cases the force generated by a pneumatic actuator is not sufficient to carry out its required function. To overcome this problem it is then necessary, where possible, to either increase the working pressure or use a larger bore actuator providing it will fit within the structure of the machine.
– Pressure Booster with max. 2:1 Compression ratio
– Automatic operation for use with compressed air only
– Maintains downstream air when the supply pressure fails
(Providing the circuit has no leakage)
– Integrated regulator for output pressure control, with overpressure relief valve
– IN,OUT and EXH connections – G1/4” on the same side
– Manometer connections G1/8” to monitor and control the input and
output pressures
– Body and cover in technopolymer
– Connections in technopolymer
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
SERIES P+Technical characteristics
Connections ( IN / OUT / EXT ) | G1/4" | |
Manometer connections P1/P2 | G1/8" | |
Working pressure ( bar ) [ Min. - Max. ] | 2,5 ÷ 10 | |
Working temperature ( °C ) [ Min. - Max. ] | -5 ÷ + 50 | |
Moltiplication ratio max. | 2 : 1 | |
Assembly position | Any | |
Pressure regulation | Manual with relieving | |
Weight | 905 gr. | |
Max. fittings torque | G1/8 = 4 N/m G1/4 = 9 N/m | |
Characteristics curves
PNEUMAX – SERIES P+ | Pressure booster in Technopolymer Ø40
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th
