ข้ามไปยังเนื้อหา
Pneumatic and Automation
SmartMeasurement – Micro-Bend Coriolis Mass Flow Meter [ALCM-MB]
- Suitable for aggressive & contaminated media
- Measurement of mass flow, density, temperature & volume flow
- High rotation frequency & well-balanced measuring tubes
- Excellent purging & sterilization capabilities thanks to a construction that is free of dead spots
- Operates at temps up to 662°F (300°C)
- Individual 8-point-calibration including report
- Optional EX protection
Pneumatic and Automation
SmartMeasurement – Multi-Variable Differential Pressure Transmitter [ALDPT-MV]
จุดเด่นของ SmartMeasurement - ALDPT-MV
- Multi-parameter capablity in a single transmitter – up to three measured values
- May be used for level and flow measurement of gas, liquid and steam
- Modular: interchangeable electronics with self-reconfiguration
- Advanced diagnostics capabilities
- Dynamic flow correction with continuous calculation of Reynolds’s number and flow
- Displays process value(s) and alarm status
- Mass and standard volume flow in accordance with AGA 3 or DIN EN ISO 5167
- Convenient; configurable via local operating keypad
- Linearization of the primary elements
- Analog 4～20 mA DC two wire linear output
- HART protocol
Pneumatic and Automation
SmartMeasurement – Oval Gear Micro Flow Positive Displacement Meter [ALMGPD]
- Compact and lightweight, suitable for OEM use
- Reverse-flow detection and pulse multiplication functions
- Ex-protection EExiaIICT6/T4
- Resistance to high voltage from 50 kV up to 120 kV
- Special meters with high-pressure connectors for service up to 690 barg (10,000 PSIG)
- Heated versions are available on request
- The K-factor (no. of pulses per liter) is nearly constant over a wide range.
Pneumatic and Automation
SmartMeasurement – Oval Gear Positive Displacement Meter [ALOVPD]
- Superior accuracy – to 0.5% of reading with ±0.03% repeatability
- Elliptical gear design provides low pressure loss
- Meter body is available in CS (Std), 304SS or 316SS
- Bearings are available in CS (Std), 304SS or 316SS as well as Alnico
- Will accommodate pressures of up to 870 psig (60 bar)
- Will accommodate viscosities of up to 1000 cP
Pneumatic and Automation
SmartMeasurement – Portable Ultrasonic Flow and Energy Meter [ALSONIC-PL]
- 2 line LCD display with flow rate, totalizer & diagnostics
- Stores up 512 days of data w/recording interval of 1 to 3600 seconds
- Velocity range of ±0.98 ft/s~±32 ft/s (±0.1 ~±10 m/s)
- Pipe sizes from 1-48″ (25~1200) mm
- Bracket-type transducers for easy installation without mounting belt
- Data logger includes date, totalizer, signal condition & diagnostic code status
- Response time of less than 1 second
จุดเด่นของ Thermal Dispersion Flow Switch
- Direct mass flow measurement of any gas with actual gas calibration
- Portability, with up to 10 Hours of rechargeable battery operation
- Data logging of gas mass flow rates with up to 3800 data points
- Up to 16 unique calibrations or applications can be programmed onto a handheld unit
- Easily transfers data into Excel spreadsheets
- Tracking of overall gas consumption over a turndown ratio of at least 100:1
- Graphical bar representing the flow rate
- OLED display shows Flow, Temperature, Log#, Channel ID, Date & Time Stamps
- 8-character TAG IDs defining specific pipe locations
- No moving parts, and negligible pressure drop
- Configurable via Keypad or using Addresser software (included)
Pneumatic and Automation
SmartMeasurement – Small Size Low Flow Magnetic Flow Meter [ALMAGMINI] ALMAG-MN
- Liners of PE, Peek or Ceramic
- Fluid velocity range of 0.01m/s – 10m/s, ideal for flow applications
- ½” NPT or BSP process connections
- Ideal for extremely low flow applications
- Features a built in PT1000 temperature sensor; 0.1°F resolution
- Available with SS #316L or Hastelloy C electrodes
- High accuracy – ±0.5% of reading (Velocity > 0.6m/s) or ±3mm/s (Velocity ≤ 0.6m/s)
- Available with 4-20mA and 0-5KHz pulse and 2A relay outputs
- RS485 MODBUS; Optional for version w/ display, standard for blind version