Skip to content
Transmitter for electromagnetic- inductive flow sensors
The transmitter Type SE56 Flow Sensors (without a display in the compact variant or with a display in the compact or remote variant), connected to the electro-magnetic sensor (compact or remote variant) Type S051, S054, S055 or S056, is designed for liquids with a minimum conductivity of 5 μS/cm. The device can be parameterised manually either via three buttons (variant with a display) or by a computer via a serial interface. In the standard variant, the device is supplied with one or two transistor outputs and one digital input. Further options are available, e.g. high frequency output, current output.
The type SE56 is not available anymore since 7/31/22.
Please contact us for a consultation regarding the most suitable successor article for your requirements.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
TYPE se56 สามารถใช้ได้ร่วมกับ
-
Burkert - Type S051 Low Flow Rates Magnetic Inductive Flow Sensor
-
Burkert - Type S054 Magnetic Inductive Sensor without Flange (Wafer Connection)
-
Burkert - Type S056 - Magnetic Inductive Sensor with Hygienic Process Connection
General Technical Data
Product properties |
|
| Housing material | Die casting aluminium or stainless steel 304 electro-polish |
| Dimensions | Detailed information can be found in chapter “2. Dimensions” on page 7. |
| Compatibility | Electromagnetic flow sensors Type S051, S054, S055, S056 in compact or remote ver-sion Detailed information can be found in data sheets, see data sheet Type S051 , data sheet Type S054 , data sheet Type S055 , data sheet Type S056 . |
| Display | Graphic display 8 lines x 16 Characters, 128 x 64 pixels with back light |
| Keyboard | 3 membrane keys |
| Cable length | For remote version: max. 20 m (distance between sensor and transmitter) |
| Data-logger | An EEPROM stores the measured values (in case of power failure) |
| Special function | • Bidirectional measure • Dual measurement range • Diagnostic functions such as empty pipe detection • Remote configuration (for connection to PC through remote configuration tool kit) • Batch and filling functions |
Performance data |
|
| Measurement deviation | ± 0.2 % of reading |
| Repeatability | ± 0.1 % of reading |
| Measurement tolerance | • Flow rate (volume) = ± 0.05 % of reading • Out 4/20 mA = ± 0.08 % of reading • Frequency out = ± 0.08 % of reading |
Electrical data |
|
| Operating voltage | 90…265 V AC, 44 Hz…66 Hz |
| Power consumption | Max. 25 VA |
| Input | 1 digital, function use is configurable |
| Outputs | • Transistor: 2 outputs, selectable open collector as pulse/frequency (1250 Hz, 100 mA, 40 V DC) or alarm (adjustable usage) • Current: 1 output, 4…20 mA, RL = 1000 W (+ a second output, on request) • Serial interface (on request): RS-232, RS-485 (Modbus protocol available) |
| Galvanic isolation | All the input/outputs are galvanically isolated from power supply |
Process/Port connection & communication |
|
| Electrical connection | 6 cable glands PG11 |
Approvals and certificates |
|
| Degree of protection according to IEC/EN 60529 | • In standard compact version: IP67 • In standard remote version: – IP65 – IP68 (if the junction box of the sensor is filled with resin) |
| Protection class | Class I |
| CE directives | The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applica-ble). |
Environment and installation |
|
| Ambient temperature | – 20…+ 60 °C (- 4…+ 140 °F) (operation and storage) |
| Relative air humidity | ≤ 90 %, without condensation |
| Height above sea level | Max. 2000 m |
| Operating condition | Continuous |
| Equipment mobility | Fixed device |
| Application range | Indoor and outdoor (protect the device against electromagnetic interference, ultraviolet rays and against the effects of climatic conditions) |
| Installation category | Category II according to UL/EN 61010-1 |
| Pollution degree | Degree 2 according to UL/EN 61010-1 |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th