Add to wishlist
Burkert - Type 8719 - Liquid Flow Controller (LFC)
Burkert - Type 8719 - Liquid Flow Controller (LFC) - Image 2
Burkert - Type 8719 - Liquid Flow Controller (LFC) - Image 3

Burkert – Type 8719 – Liquid Flow Controller (LFC)

จุดเด่นของ Type 8719

  • Fieldbus optional
  • Protection class IP65
  • No moving parts in medium
  • Applicable for liquid dosing up to 600 ml/min (36 l/h)
  • High dynamic control through fast flow measurement
Send Email LINE OA
หมวดหมู่: , , ,

Liquid Flow Controller (LFC)

Type 8719 is an instrument for liquid flow control in process technology. The measured value provided by the sensor will be compared in the digital control electronics with the predefined set point according to the signal; if a control difference is present, the control value output to the proportional valve will be modified using a PI-control algorithm. In this way, the flow can be maintained at a fi xed value or a predefined profile can be followed, regardless of pressure changes or other disturbances in the system. As a control element, a proportional valve working at low friction guarantees the high sensitivity and good control characteristics of the unit.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 8719

BURKERT TYPE 8719 สามารถใช้ได้ร่วมกับ

General Technical Data

Product Properties
Body material
Stainless steel
Housing material PBT
Seal material FKM, EPDM or FFKM
Dimensions
115×137.5×37 (BxHxT)
Total weight Approx. 1200 g
LED display Indication for:
1. Power
2. Communication
3. Limit
4. Error

Performance Data
Full scale range (QNom)
1.5…36l/h (25…600ml/min) regarding water
 Measuring range 01:10
Max. operating pressure
Up to max. 10 barg; typical max. 2 barg
Measuring accuracy
±1.5% o. R. ±0.5% F. S.
Repeatability ±0.5% F. S.
Response time (t95%) ±0.5% F. S. <500 ms

Electrical Data
Operating voltage
24 V DC
Power consumption Max. 7.5 W (10 W with fieldbus version)
Voltage tolerance ±10%
Residual ripple <2%
Electrical connection Socket round, 8 pin,
Socket Sub-HD, 15 pin,
Plug or Socket M12, 5 pin (with fieldbus)

Medium Data
Operating medium
Clean and low viscous liquids
Calibration medium Water (conversion to operating medium with correction function)
Medium temperature
– 10 °C…+ 40 °C
Viscosity (max.)
0.4 to 4 cSt

Process/Port Connection & Communication
Port connection
G 1⁄8, NPT 1⁄8, G 1⁄4, NPT 1⁄4
Digital outputs Two relay-output for:
1. Limit (desired value can not be achieved) 2. Error (e.g. sensor failure)
Current output: max. 60 V, 1 A, 60 VA
Digital inputs Three:
1. Start Autotune
2. Open valve (for purging)
3. Not assigned
Digital (communication) interface
 Digital via Fieldbus:
• PROFIBUS DP V1
• CANopen
Analogue interfaces 4…20 mA, 0…20 mA, 0…10 V or 0…5 V
Input impedance >20 kΩ (Voltage) resp. <300 Ω (Current)
Max. load: 10 mA (Voltage output); max. load: 600 Ω (Current output)

Environment and Installation
Ambient temperature
0 °C…55 °C
Installation position
Horizontal or vertical
Degree of protection
 IP65

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th