Burkert – Type 8056 Electro-magnetic flowmeter, hygienic process connections

Full bore magmeter, hygienic process connections

The flowmeter Type 8056, which consists of a sensor Type S056 (compact or remote variant) connected to the electronics assembly Type SE56 (without a display in the compact variant or with a display in the compact or remote variant), is designed for liquids with a minimum conductivity of 5 μS/cm. Combined with a dosing valve, the flowmeter Type 8056 can also be used for high-precision filling and dosing procedures and for flow measurements in the food, beverage or pharmaceutical industry.

The type 8056 is not available anymore since 7/31/22.
Please contact us for a consultation regarding the most suitable successor article for your requirements.

TYPE 8056

• Burkert - Type 8644 AirLINE SP electropneumatic automation system
• BURKERT - TYPE 8693 Digital Electro Pneumatic Positioner for Integrated Mounting on Process Control Valves

General Technical Data

Product properties
Sensor housing	Stainless steel 304/1.4301
Electrode	Stainless steel 316L
Lining	PTFE
Seal	FKM (EPDM conform to FDA on request)
Pipe diameter	DN 03…DN 100
Dimensions	Detailed information can be found in chapter “3. Dimensions” on page 6.
Measuring principle	Electromagnetic induction Detailed information can be found in chapter “5.1. Measuring principle” on page 11.
Measuring range	0…10 l/h to 0…28 m3/h Detailed information can be found in chapter “6.4. Ordering chart sensor Type S056” on page 13.
Performance data
Measurement deviation	If used with SE56 transmitter: •in standard compact version: ± 0.2 % of reading •in standard remote version: ± 0.2 % of reading •in Basic compact version: ± 0.8 % of reading •in compact version without display: ± 0.2 % of reading
Repeatability	If used with SE56 transmitter: • in standard compact version: ± 0.1 % • in standard remote version: ± 0.1 % • in Basic compact version: ± 0.2 % • in compact version without display: ± 0.1 %
Vacuum resistance	200 mbar (2.9 PSI) absolute at 100 °C (212 °F)
Medium data
Fluid temperature	If used with SE56 transmitter: • in standard compact version: – 20…+ 100 °C (- 4…+ 212 °F) • in standard remote version: – 20…+ 130 °C (- 4…+ 266 °F) • in Basic compact version: – 10…+ 100 °C (+ 14…+ 212 °F) • in compact version without display: – 20…+ 100 °C (- 4…+ 212 °F), up to + 130 °C (+ 266 °F) for max. 1 hour
Fluid pressure	PN 16
Minimum conductivity	5 µS/cm (or 20 µS/cm with demineralised water)
Process/Port connection & communication
Process connection	DIN 11851, clamp ISO 2852 or clamp BS 4825 (SMS 1146 (from DN 10) on request)
Electrical connection	2 cable glands PG9 (for remote version of the sensor)
Approvals and certificates
Degree of protection according to  IEC/EN 60529	If used with SE56 transmitter: • in standard compact version: IP65 and IP67 • in standard remote version: – IP65 – IP68 (if the junction box of the sensor is filled with resin) • in Basic compact version: IP65 • in compact version without display: IP65 and IP67
CE directives	The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applica-ble).
Pressure equipment directives	The device is subject to the requirements of the Pressure Equipment Directive 2014/68/EU. Category II device for group 1 and 2 fluids under the following conditions: • maximum allowable pressure (PS) ≤ 40 bar • minimum/maximum temperature (TS): – 10/+ 130 °C • within the following limits for liquids of group 2: – PN 40 for DN 40…DN 250 • within the following limits for liquids of group 1 with a vapour pressure at the maxi-mum allowable temperature not exceeding 0.5 bar (g): for diameters above DN 25 and PS x DN > 2000
Environment and installation
Ambient temperature	If used with SE56 transmitter: • in standard compact version: – 20…+ 60 °C (- 4…+ 140 °F) (operation and storage) • in standard remote version: – 20…+ 60 °C (- 4…+ 140 °F) (operation and storage) • in Basic compact version: – 10…+ 50 °C (+ 14…+ 122 °F) (operating) – 20…+ 50 °C (- 4…+ 122 °F) (storage) • in compact version without display: – 20…+ 40 °C (- 4…+ 104 °F) (operation and stor-age)
Relative air humidity	≤­90­%,­without­condensation
Height above sea level	Max.­2000 m
Operating condition	Continuous
Equipment mobility	Fixed device
Application range	Indoor­and­outdoor­(protect­the­device­against­electromagnetic­interference,­ultraviolet­rays and­against­the­effects­of­climatic­conditions)
Installation category	Category II according to UL/EN 61010-1
Pollution degree	Degree 2 according to UL/EN 61010-1

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th