Skip to content
The bellow control valve is a pneumatically operated process valve with a single-acting diaphragm actuator. A PTFE bellow ensures the separation between medium and actuator. The materials used and the design of the media space allow the use under hygienic or aggressive conditions. It has a good cleanability. The combination with a controller (Type 869x) and the control cone integrated into the bellow enable the valve to handle demanding control tasks. The space-saving actuator with low internal volume not only results in a very compact size but also in remarkably low response times. The valve is characterized by a good control performance due to the low-friction design and has a linear characteristic. A certain variety of body and block system solutions are deliverable.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties |
|
| Dimensions | Detailed information can be found in chapter “5. Dimensions” on page 6. |
|
Body material (Medium contact)
|
Stainless steel 316L ASME BPE (1.4435 BN2) |
| Bellows material (Medium contact) | Advanced PTFE |
|
Seal material (No medium contact)
|
EPDM, FKM |
| Controller material (No medium contact) | PPS, stainless steel |
| Actuator material (No medium contact) | 304 (1.4301) or CF-8 (1.4308) |
| Threaded connection standard surface quality | Ra 1.6 μm |
| Weld and clamp connections standard surface quality | Internal mechanically polished : Ra 0.6 μm Internal electrically polished : Ra 0.38 μm |
Performance Data |
|
|
KVS value
|
0.05…1.8 m3/h
|
| Seat leakage | <0.01% of full flow capacity (ANSI Class IV) |
| Pilot pressure (max.) | 5.5…7 bar(g) |
| Reaction/switching time | Typical settling time <1 sec. |
Electrical Data |
|
|
Electrical characteristics
|
Defined by the use of Type 869x |
| Electrical signal/communication | Analogue standard signal (e.g. 4…20 mA) / Bus communication (e.g. Ethernet/IP, büS) (depending on Type 869x) |
Medium Data |
|
|
Medium
|
Gases and fluids (ultra-pure, sterile, dirty, aggressive, abrasive or also highly viscous); Steam (for sterilisation).
|
|
Medium temperature
|
0…+ 80 °C (- 10 °C…+ 150 °C for restricted operating conditions)
|
| Medium pressure | Vacuum up to 6 bar (g) |
| Control medium | Air or neutral gases (DIN ISO 8573 – 1: Dust Q.-Kl. 7, Water Q.-Kl. 3, Oil Q.-Kl. X) |
Process/Port Connection & Communication |
|
|
Nominal diameter
|
DN4…DN15
|
| Nominal seat size | DN1.5…DN10 |
|
Threaded port connection
|
G (DIN EN ISO 228-1)
|
| Welded port connection |
DIN 11850 series 0 / DIN 11866 R. A / DIN 11850 R. 2 DIN 11866 R. B / DIN ISO 4200 DIN 11866 R. C / ASME BPE
|
|
Clamp connection
|
On request
|
| Pilot air ports | Thread G 1⁄8 |
| Electrical connection | Circular connectors (Multipole) / Cable gland (depending on Type 869x) |
Approvals and Certificates |
|
|
Conformity
|
CE acc. to EG declaration of conformity (2014/30/EU EMC) FDA / EG regulation no. 1935/2004
|
| Certificates |
United States Pharmacopeia (USP) Class VI – 121 °C
|
| Approvals | ATEX II Cat. 3 G/D (on request) |
Environment and Installation |
|
|
Installation position
|
See “7. Product installation” on page 8
|
| Ambient temperature |
– 10…+ 55 °C
|
| Degree of protection |
IP65/67 acc. to EN 60529
|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th
