Skip to content
The Type 2080 valve consists of a pneumatically piston actuator, a stainless steel body and PTFE bellows. The PTFE bellows are used for the separation of the medium.The materials used and the internal contours are simple to clean (CIP and SIP). The valve is suitable for food technology. The modular structure permits configuration with different armatures and customized port connectors. The pneumatic actuator is servo assisted by a pilot valve, a valve block or similar.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties |
|
| Dimensions |
Detailed information can be found in chapter “4. Dimensions” on page 5.
|
|
Body material
|
Stainless steel 316Ti (1.4571) for flange 316L (1.4404)
|
| Actuator material | Stainless steel 304L (1.4301) |
| Bellows material | Advanced PTFE |
| Wetted materials | Stainless steel 316Ti/316L, advanced PTFE |
|
Flow direction
|
Below seat (pressure on port connection 2)
|
| Nominal diameter | DN10, DN6 (flange), others on request |
| Actuator size | Piston diameter 32 mm |
| Standard surface quality | Ra=0.76 μm |
Performance Data |
|
|
Pilot air pressure
|
4.5…10 bar |
| Seat leakage |
5 Nml/min, measured with air, 8 bar below seat
|
| Pressure range | – 0.9…8 bar |
Medium Data |
|
|
Medium
|
Neutral to aggressive gases and liquids |
|
Medium temperature
|
See “5.1. Pressure temperature diagram” on page 7
|
| Control medium | Neutral gases, air |
Process/Port Connection & Communication |
|
|
Port connection
|
Thread, weld, flange (others on request)
|
| Pilot air ports | M5, G 1⁄8 |
Environment and Installation |
|
|
Installation position
|
Preferably actuator upwards
|
| Ambient temperature | – 10…90 °C |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th