Burkert – Type 0201 – 2/2 Way Direct-Acting Plunger Valve

จุดเด่นของ Type 0201 – 2/2 Way Direct-Acting Plunger Valve

Compact design, up to DN 1,6
Vibration-resistant block-screwed coil design
Housing made of brass and stainless steel with Bürkert flange SFB

หมวดหมู่: Solenoid valve, วาล์วควบคุม (Solenoid Valve Process and Control Valve)

คำอธิบาย

Type 0201 is a normally-closed direct-acting plunger-type solenoid valve. Direct-acting, Sub-base When energized, the solenoid armatureis drawn in against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 0201

Advantages / Benefits

Brass Body
Compact Design
Normally Closed (NC)
Short Response Times

Applications

Vacuum
Pneumatic control
Neutral gases and liquids
Gas control, welding technology
Shut-off, dosing, filing, and ventilating
Small scale devices, laboratory, and measuring technology

Technical Data
Circuit Function	A 2/2-Way Valve, Normally Closed (NC)
Body Material	Body and seat of brass Stainless steel / Valve internals 1.4105, 1.4571

Operating Data (Valve)
NBR	Neutral fluids, e.g. compressed air, town gas, water, hydraulic oil; -10 to + 90 °C
FPM	Hot air, oxygen, per-solutions, hot oils, oils with additves; -10 to +100 °C
Max. ambient temperature	55 °C
Max. viscosity	approx. 21 mm2/s
Response times	Opening 5 – 18 ms / Closing approx. 8 ms
Port connection	Sub-base

Operating Data (Actuator)
Operating voltages	AC 24, 230, 240 V/50 Hz / DC 12, 24 V/=
Voltage tolerance	± 10%
Power consumption – AC	9 VA (inrush) / 6 VA/4 W (hold)
Power consumption – DC	4 W or 2 W depending on version
Duty cycle	100 % continuously rated, reduced for manifold mounting or use 2 W version
Cycling rate	approx.1000 c.p.m.
Classification with plug or cable	IP65

Installation / Accessories
Installation	As required, but preferably with solenoid system upright
Electrical connection	Plug connection without cable plug / moulded-in cable on request / 2 or 3 moulded-in flying leads on request

Manifold Mounting

The manifolds for 1 to 6 valves have a common pressure inlet and individual outlet for each valve. Type 201 may also be mounted together with Type 301 valves (circuit function C, de-energized, outlet A exhausted) on the same manifold. The electrical connection can be either to the right or left of the manifold.

Manifolds may be coupled together using special push- fit O-ring connecting nipples for linking the pressure inlets P. Manifolds joined together in this way should be securely mounted.

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.