Skip to content
Type 0200 is a direct-acting plunger valve type solenoid valve normally closed by spring action (circuit function A). A diaphragm isolates the fluid from the solenoid system. When energized, the solenoid armature is drawn against a spring to open the valve. The solenoid epoxy encap sulation efficiently dissipates the heat generated by the coil. Specific testing and cleaning and low power versions are available according to application requirements.
General Technical Data
Advantages / Benefits
- Normally closed
- Compact design
- Short response time
- Body materials: brass, stainless steel
Applications
- Vacuum
- Pneumatic control
- Natural gases and liquids
- Gas control, welding technology
- Shut-off, dosing, filling, ventilating
- Small-scale instrument, laboratory, and technology
Technical Data |
|
|
Circuit Function
|
A 2/2-way valve, normally closed
|
| Body Materials |
Brass body and seat Stainless steel / Valve internals 1.4105, 1.4571
|
Operating Data (Valve) |
|
| NBR |
Neutral fluids, e.g. compressed air, town gas, water, hydaulic oils -10 to +90 °C
|
| FPM |
Hot air, oxygen, per-solutions, hot oils, oils with additives -10 to +100 °C
|
|
Max. ambient temperature.
|
55 °C |
|
Max. viscosity
|
approx. 21 mm2/s
|
|
Response times
|
Opening 5 – 18 ms / Closing approx. 8 ms
|
|
Port connection
|
G 1/8, M5
|
| Operating voltages | AC 24, 230, 240/50 Hz DC 12, 24 V/= |
|
Voltage tolerance
|
± 10%
|
|
Power consumption
|
AC 9 VA (inrush), 6 VA/4 W (hold), DC 4 W, 2 Watt-version, 6 VA (inrush), 5 VA/2 W (hold)
|
|
Duty cycle
|
100% continuously rated |
|
Cycling rate
|
approx. 1000 c.p.m.
|
|
Rating
|
with plug Type 1051 or cable IP 65
|
Installation / Accessories |
|
|
Installation
|
As required, but preferably with solenoid system upright
|
|
Electrical connection
|
Cable connection without cable plug (supplied as standard) / moulded-in cable on request / 2 or 3 moulded-in flying leads on request
|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
