Add to wishlist
Burkert-Type 0127 - Direct-acting Rocker-Solenoid Valve with separating diaphragm
Burkert-Type 0127 - Direct-acting Rocker-Solenoid Valve with separating diaphragm
Burkert-Type 0127 - Direct-acting Rocker-Solenoid Valve with separating diaphragm
Burkert-Type 0127 - Direct-acting Rocker-Solenoid Valve with separating diaphragm
Burkert-Type 0127 - Direct-acting Rocker-Solenoid Valve with separating diaphragm
Burkert-Type 0127 - Direct-acting Rocker-Solenoid Valve with separating diaphragm

Burkert – Type 0127 – 2/2 or 3/2 Way Direct Acting Solenoid Valve with Separating Diaphragm

จุดเด่นของ Type 0127

  • Proven reliability since 1993
  • Flexible design for custom manifold assemblies
  • For maximum chemical resistance requirements
  • Compact design with 16 mm width and Cv ratings up to 0.058
  • High back pressure tightness, excellent cleanability and 100 % duty cycle
Send Email LINE OA
หมวดหมู่: ,

Direct-acting 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

Bürkert’s unique miniature rocker solenoid valve is the pioneer of isolated mini valves suitable for laboratory, medical and analysis technology, that still set the standard! It is a highly reliable minimum volume valve that has low dead volume and is easy to purge. Boasting an inert isolating diaphragm between the actuator and body, it is operated via a rocker that separates the actuator from the fluid. Heat transfer between the actuator and the fluid is minimized due to the coil not having direct contact with the diaphragm. The valves can be manifold mounted, and a simplified common wiring system is available if required. Special dead volume free designs are also obtainable on request.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 0127

BURKERT TYPE 0127 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions Detailed information can be found in chapter “5. Dimensions” on page 6.
Material
Fluid housing PEEK, PVDF, PPS
Seal FFKM, FKM, EPDM
Nominal diameter/Orifice 10 mio. switching cycles (according to laboratory endurance test with FKM and EPDM)
Internal volume Sub-base: starting at 44 µl
G ⅛ and NPT ⅛: starting at 100 µl UNF ¼… 28: starting at 25 µl Tube connection: starting at 33 µl < 10 µl available on request
Orifice DN 0.8…DN 1.6

Performance data
Response times Open: ca. 25 ms (Pressure rise 0…10 %)
Closing: ca. 25 ms (Pressure drop 100…90 %)

Electrical data
Operating voltage 12/24 V DC, other voltages are available on request
Voltage tolerance ± 10 %
Power consumption 3.4 W
Duty cycle 100 % continuous rating
Manifold mounting: If medium or ambient temperatures are above + 40 ºC: intermittent operation 40 % (minimum 10 min)

Medium data
Medium temperature – 10 °C…+ 55 °C
Operating medium Resistant to neutral gases (5 µm filtering); see chapter “4.1. Chemical Resistance Chart – Bürk-ert resistApp” on page 5.
Viscosity (max.) 21 mm²/s

Process/Port connection & communication
Port connection Bürkert sub-base (16 × 27 mm) G ⅛
NPT ⅛
UNF ¼ …28
Tube connection
Electrical connection Cable plug Type 1054
Two FEP-leads 0.2 mm², length 500 mm Rectangular cable plug, Type 2505

Approvals and certificates
Protection class IP65 with flying leads and cable plug Type 1054 IP30 with rectangular plug Type 2505

Environment and installation
Ambient temperature (max.) 55 °C
Installation position As required, preferably with actuator upright

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th