Skip to content
Micro Dosing Unit for precise dosing in microlitre-range
Bürkert’s Micro Dosing Unit has been designed for precise dosing applications in the microliter range. It combines high dosing accuracy and precision with excellent chemical inertness. The unit is comprised of three valves which can be opened simultaneously for flushing. Active inlet and outlet valves enable the device to pump liquid in two directions. This feature can be used to mix fluids inside a tube or channel or to constantly keep them in motion. Reagents can be sucked back from the dispensing tip to prevent drying out after dosing. The integrated heating function heats up the valves and the medium, and the unit comes with dry running capabilities.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product properties |
|
| Dimensions | Detailed information can be found in chapter “4. Dimensions” on page 5. |
| Material | |
| Seal | FFKM, EPDM pump diaphragm on request |
| Body | PEEK |
| Fluidics | PEEK |
| Cover | PPS (not in contact with media) |
| Base plate | Stainless steel (not in contact with media) |
| Dosing quantity | Adjusted to 5 µl/stroke ± 1.5 %1.), max. approx. 8 ml/min; at 40 Hz bidirectional |
| Dosing accuracy | ± 3.5 % |
| Repeatability | ± 2 % |
| Max. suction Lift | > 0.7 m (dry) > 4 m (wet) |
| Weight | Ca. 120 g |
| Typical product service life | Approx. 20 M cycles (at 20 °C, 10 Hz, water) |
Performance data |
|
| Max. outlet Pressure | 1.0 bar |
Electrical data |
|
| Operating voltage | 12 V DC, 24 V DC |
| Power consumption | 11 W (short term), 5 W |
| Duty cycle | 100 % |
| Voltage tolerance | ± 10 % |
Medium data |
|
| Medium temperature | + 15 °C…+ 60 °C (FFKM) + 5 °C…+ 60 °C (EPDM)4.) |
| Operating medium | Neutral and aggressive liquids See also chapter “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 4. |
| Viscosity (max.) | < 250 mm2/s |
Process/Port connection & communication |
|
| Port connection | Sub-base connection, UNF ¼”- 28 |
| Electrical connection | E.g. suitable for connection to Molex plug no. 50 – 57 – 9404 See also chapter “9.4. Ordering chart accessories” on page 9. |
Environment and installation |
|
| Ambient temperature (max.) | + 10 °C…+ 55°C4.) |
| Installation position | Variable, unit with two holes for M3 fixing screws |
| Degree of protection | IP40 |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th
