• Superior accuracy – to 0.5% of reading with ±0.03% repeatability
• Elliptical gear design provides low pressure loss
• Meter body is available in CS (Std), 304SS or 316SS
• Bearings are available in CS (Std), 304SS or 316SS as well as Alnico
• Will accommodate pressures of up to 870 psig (60 bar)
• Will accommodate viscosities of up to 1000 cP

• 2 line LCD display with flow rate, totalizer & diagnostics
• Stores up 512 days of data w/recording interval of 1 to 3600 seconds
• Velocity range of ±0.98 ft/s~±32 ft/s (±0.1 ~±10 m/s)
• Pipe sizes from 1-48″ (25~1200) mm
• Bracket-type transducers for easy installation without mounting belt
• Data logger includes date, totalizer, signal condition & diagnostic code status
• Response time of less than 1 second

• Liners of PE, Peek or Ceramic
• Fluid velocity range of 0.01m/s – 10m/s, ideal for flow applications
• ½” NPT or BSP process connections 
• Ideal for extremely low flow applications
• Features a built in PT1000 temperature sensor; 0.1°F resolution
• Available with SS #316L or Hastelloy C electrodes
• High accuracy – ±0.5% of reading (Velocity > 0.6m/s) or ±3mm/s (Velocity ≤ 0.6m/s)
• Available with 4-20mA and 0-5KHz pulse and 2A relay outputs
• RS485 MODBUS; Optional for version w/ display, standard for blind version

จุดเด่นของ SmartMeasurement - ALVT

• Suitable for a wide variety of applications with steam, gas, and liquid medias
• No moving parts and no leak paths; no o-ring or graph oil seals to wear, fail or leak
• Two independent sensors, allowing for better signal amplification and noise reduction
• Error messages displayed for or erratic flows and flows outside of calibrated ranges
• Field calibration possible with integral or remote electronics and keypad
• True 2-wire 4-20 mA interface
• Wide measuring range, turn-down ratio of 30:1
• Can measure at Reynolds Numbers ranging from 10,000 to 7,000,000
• Weatherproof multi-pole connector for power, signal and serial interface
• Area of measurement can be smaller than pipe connection for better rangeability

จุดเด่นของ SmartMeasurement - ALCM-ST

• Measurement of mass flow, density, temperature & volume flow
• Suitable for aggressive & contaminated media
• Very low pressure drops, only 2″ and 3″ (50mm and 80mm) available
• Operates at temperatures up to 392°F (200°C)
• Individual 8-point calibration including NIST-traceable report
• Optional EX protection