ข้ามไปยังเนื้อหา
AIR SERVICE UNITS SERIES 1700 STEEL LINE
PNEUMAX – ตัวปรับแรงดันลม REGULATOR SIZE 2 INOX 1/4 NTP – 3/8 NPT – G1/4
จุดเด่นของ PNEUMAX - ตัวปรับแรงดันลม REGULATOR SIZE 2
- Body, adjust. mechanism, AISI 316L stainless steel and caseback inter. components
- AISI 316 Adjustment springs.
- Fixing screws, adjustment screws and locknut in A4 (AISI 316) stainless steel.
- Pressure regulator diaphragm with over-pressure exhaust (Relieving).
- Low hysteresis rolling diaphragm.
- Balanced system.
จุดเด่นของ PNEUMAX - พร๊อกซิมิตี้เซนเซอร์ PROXIMITY SENSOR
- Nickel brass sensor, usable on valves up to size 2 inches for detection ON - OFF
- Cable: 2 m
- A reduction is available for sizes 2 1/2” and 3”.
จุดเด่นของ PNEUMAX - วาล์วนิวเมติกส์ 5/2 – 5/3, 1/4″ NPT
- Minimum piloting pressure 2,5 bar
- Fluid: Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural).
จุดเด่นของ PNEUMAX - สปริงวาล์ว นิวเมติกส์ 3/2, 1/4″ NPT
- Minimum piloting pressure 2,5 bar
- Fluid: Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural).
จุดเด่นของ ADJUSTABLE VACUUM GENERATOR CONVEYOR – 19M*.S.00.SS.RG
- Based on the Ventury principle, these differ from traditional ones because they have a much better ejector and are adjustable, this characteristic makes it possible to change the device’s low rate and degree of vacuum without affecting the inlet pressure. Their special shape and their operating principle make them suitable for suction and the transfer of powders, granules, sawdust, metal chips, liquid or dry food products, etc., to control suction cups in the presence of large quantities of powders or liquids; these can also be used to suction smoke, coolant fog, water vapour, etc.
จุดเด่นของ PNEUMAX - 83892600 CIRCULAR MULTI-CHANNEL NOZZLE ABS
- This model combines the undisputed advantages of the flat jet nozzle with a broader range of application and is ideal for stationary tasks.
จุดเด่นของ PNEUMAX - 83892600 CIRCULAR MULTI-CHANNEL NOZZLE ABS
- Recommended for particularly harsh operating conditions, such as high temperatures (foundries, etc.) Principle application: blow guns.