Skip to content
Lockout valves are offered in a full range of port sizes, and with different actuation modes. Each valve is designed to satisfy the OSHA requirements for energy isolation and lockout. They are not, however, intended as emergency stop devices. They lock out the supply air in a system with an easy pushing or sliding motion, and also e x h a u s t d own stream air pressure. Even after extended periods on standby, the valves are designed with seals and materials that allow the lockout control to move smoothly into the lockout position. All Master Pneumatic lockout valves can be secured in the closed position by means of a padlock so that the valve cannot be inadvertently opened to cause a potentially hazardous situation. Shown above is one of the manual padlocked in the closed position.
Accessories, Brackets, Gauges and Valves
Master Pneumatic – V10 Sentry Slide 1/8, 1/4 and Tube Fittings
จุดเด่นของ V10 Sentry Slide 1/8, 1/4 and Tube Fittings
- 3 Way lockout valve specifically for use with Sentry FRLs
- Threaded ports or quick-connect fittings for tubing up to 10 mm in diameter
- Available pre-assembled on FRL assembly, or as a single component for retrofitting in the field
- Can be padlocked only in the closed position
- Slide moves smoothly even after long period on standby
- NPTF port threads; optional BSPP threads or tube fittings
Accessories, Brackets, Gauges and Valves
Master Pneumatic – V35 Guardsman Sleeve 1/4, 3/8, 1/2 and 3/4
จุดเด่นของ V35 Guardsman Sleeve 1/4, 3/8, 1/2 and 3/4
- 3-Way lockout valve specifically for use with GUARDSMAN FRLs
- Each unit has a safety yellow barrel and a caution red slide
- Can be padlocked only in the closed position
- Sleeve rotates for most convenient location of padlock
- Sleeve moves smoothly even after long period on standby
- Controlled exhaust rate muffles exhaust noise
- NPTF port threads; optional BSPP threads.
Accessories, Brackets, Gauges and Valves
Master Pneumatic – V382 Manual Control High Flow/Exhaust Lockout Valve 1/4, 3/8, 1/2 and 3/4
จุดเด่นของ V382 Manual Control High Flow/Exhaust Lockout Valve
- High flow threaded exhaust port to accommodate muffler or a line for remote exhausting.
- Compact modular (Series 380 and CFR360 / 370) or inline
- Optional slow start (delayed-pressure-buildup) function
- 3 ported valve
- NPTF port threads: Optional BSPP Threads
- 1/8” downstream pressure ports
- Options available to indicate downstream pressure
- Carboxilated Buna O-Rings & Acetal Slide for low break away friction, even after a long standby period
- PUSH to close, PULL to open.
- Preferred installation is downstream of F-R-L. NOTE: If installed upstream of regulator, the regulator must be capable of Quick Exhaust (reverse flow)
- LOTO (Lockout Tag out). Can be padlocked only in the closed position.
Accessories, Brackets, Gauges and Valves
Master Pneumatic – V40 High Flow Vanguard Manual 1-1/2 and 2
จุดเด่นของ V40 High Flow Vanguard Manual 1-1/2 and 2
- Easily identified by unique shap
- Lockable only in the OFF positio
- Large exhaust port for rapid release of pressure
- Special Teflon seals help to ensure "shift-ability" even after long periods of non-use
- Positive action (2 positions only)
- Simple push/pull of the large red handle provides direct manual operations
- Pressure sensing port allows installation of either the popup indicator or pressure switch to verify pressure downstream to the next obstruction is released
- NPTF port threads; optional BSPP threads
Accessories, Brackets, Gauges and Valves
จุดเด่นของ V382 Manual Control High Flow/Exhaust Lockout Valve
- 3-Way spool lockout valve. Available in two body sizes and five port sizes
- Large operating handle is red so it will be easily seen in the workplace
- Can be padlocked only in the closed position
- Spool moves smoothly even after a long period on standby
- Threaded exhaust port to accommodate a silencer or a line for remote exhausting
- NPTF port threads; optional BSPP threads.
Accessories, Brackets, Gauges and Valves
Master Pneumatic – V450 Vanguard Manual Pilot 3/2 Valves with Lockout Control 1 to 2-1/2
จุดเด่นของ V450 Vanguard Manual Pilot 3/2 Valves with Lockout Control 1 to 2-1/2
- 3-Way poppet valve. Available in five port sizes
- Large operating handle is red so it will be easily seen in the workplace
- Can be padlocked only in the closed position
- Lockout spool moves smoothly even after long period on standby
- Threaded exhaust port to accommodate a silencer or a line for remote exhausting
- NPTF port threads; optional BSPP threads
Accessories, Brackets, Gauges and Valves
Master Pneumatic – V460 Vanguard Solenoid Pilot 3/2 Valves with Lockout Control 1/4 to 2-1/2
จุดเด่นของ V460 Vanguard Solenoid Pilot 3/2 Valves with Lockout Control 1/4 to 2-1/2
- 3-Way poppet valve. Available in nine port sizes
- Solenoid pilot for remote control
- Solenoids CSA approved
- Large lockout handle is red so it will be easily seen in the workplace
- Can be padlocked only in the closed position
- Lockout spool moves smoothly even after long period on standby
- Threaded exhaust port to accommodate a silencer or a line for remote exhausting
- NPTF port threads; optional BSPP threads