Skip to content
Accessories, Brackets, Gauges and Valves
Master Pneumatic Thailand (DED) Warrior Drain Replacement Kits DED DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก) Master Pneumatic – (DED) Warrior Drain Replacement Kits DED
Accessories, Brackets, Gauges and Valves
Master Pneumatic – 350 and 380 Series Modular Connectors & Bracket
จุดเด่นของ 350 and 380 Series Modular Connectors & Bracket
- Modular Clamp Connections : These connections are included in all modular 350 and 380 FRL assemblies. They can be purchased seperately. Specially designed clamps provide guick and easy assembly or disassembly. Two allen head bolts tighten or loosen the clamp using a 5/32 or 4mm hex key. The clamp contains a plate carrying two o-rings to provide positive sealing between products.
- Mounting Bracket : Two brackets are reccomended to mount an FRL assembly to a verticle surface. The mounting brackets attach to the modular connecting clamps with a single screw. You will need two 1/4" or 6mm bolts per bracket to connect to mounting surface.
Accessories, Brackets, Gauges and Valves
Master Pneumatic – 350 and 380 Series Modular Extra Port Block
Master Pneumatic Thailand 350 and 380 Series Modular Extra Port Block An extra port block can be placed between modules to provide two auxiliary ports. Auxiliary ports are available in 1/4″, 3/8″ or 1/2″ sizes. Its mounting position can be rotated to obtain the most convenient operating orientation. An extra port block can be ordered
Accessories, Brackets, Gauges and Valves
Master Pneumatic – 350 and 380 Series Modular Male and Female End Ports
Master Pneumatic Thailand 350 and 380 Series Modular Male and Female End Ports Either male or female end ports can be attached to threaded inlet and outlet lines. This allows all modules of an FRL assembly to be removed easily and quickly, simply by removing modular clamp instead of having to unthread. End ports can
Accessories, Brackets, Gauges and Valves
Master Pneumatic Thailand Brackets for Surface/Panel Mounting Mounting brackets are available for both piped and modular products. * To panel or wall mount a regulator or an integral choose the bracket and nut kit. * For panel or wall mounting modular in-line combinations of products (FRL or Breathing Air Packages) or an individual filter or
Accessories, Brackets, Gauges and Valves
Master Pneumatic – DED Electronically Controlled Warrior Drain 1/4, 3/8 and 1/2
จุดเด่นของ DED Electronically Controlled Warrior Drain
- Viton seals in the valve to ensure long life and resistance to synthetic oils
- O-ring seals on timer cycle adjusters to ensure water resist and sealing IP6
- Fully Automatic - No maintenance
- Manual TEST switch (micro switch
- CD tested, UL Recognized
- Small compact design
- NPTF port threads; optional BSPP threads
- Other voltages available
Accessories, Brackets, Gauges and Valves
จุดเด่นของ E100 Hydro-Jector 1/8 and 1/4
- Discharge rate is 300 gallons (1135 liters) per hour at 100 psig (6.9 bar). Flushing action is instantaneous with minimal air loss compared to conventional drains.
- HYDRO-JECTOR drains are available with 1/8 or 1/4 nipples. The 1/4 size is used with SERIES 380 and VANGUARD filters.
- There is a manual override on the drain valve for clean-out and emergency use.
- Inorder to install a hydro-jector on a VANGUARD or SERIES 380 filter you must order filter with the option designated “LDC”. This option removes the drain cock, and replaces it with a 1/4” threaded adapter. If ordering the units together the filter will automatically be an "LDC".
- The HYDRO-JECTOR is not recommended where heavy oil or foam is present, as can be the case in separators or large aftercoolers.