Add to wishlist
PNEUMAX SPA - 1280 SERIES 1200 Rolled end covers (MIR)

MICROCYLINDERS ACCORDING TO STANDARDS ISO 6432

จุดเด่นของ PNEUMAX SPA – 1280-1281-1282 SERIES

Fluid : Filtered air and preferably lubricated
Pressure : 10 bar
Temperature :
  • 5°C – +70°C with standard seals magnetic or non magnetic piston
  • 5°C – +80°C with FPM seals magnetic piston
  • 5°C – +80°C with HNBR seals magnetic piston
  • 5°C – +120°C with HNBR seals non magnetic piston
  • 5°C – +150°C with FPM seals non magnetic piston
Send Email LINE OA
รหัสสินค้า: ISO 6432-2 หมวดหมู่: , , , , , , , ป้ายกำกับ: , , , ,

SERIES 1200 ROLLED END COVERS (MIR)

PNEUMAX SPA – 1280 -1281-1282 SERIES TO STANDARDS ISO 6432
MICROCYLINDERS ACCORDING TO STANDARDS ISO 6432

PNEUMAX SPA – 1280 1281 1282 Microcylinders are the most widespread linear actuators in common use due totheir reduced dimensions. They can be applied in the most varied of sectors,from packaging to textiles, from woodworking machines to the ceramic sector andso on.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

1200 ROLLED END COVERS (MIR)

Construction characteristic

End covers Hard anodised aluminum
Barrel Stainless steel AISI 304
Piston rod Stainless steel
Piston Brass (ø8-10-12) aluminium (ø16-20-25)
Seal Standard: NBR Oil resistant rubber, PUR Piston rod seals (HNBR or FPM seals available upon request)
Mounting Steel painted in cataphoresis
Forks Zinc plated steel
Single-acting springs C98 zinc plated steel for springs
Cushioning length   ø   16 – 20 – 25 – 32

—————————–

mm 15 – 18 – 18 – 18

Technical characteristics

Fluid : Filtered air and preferably lubricated
Pressure : 10 bar
Temperature :
  • 5°C – +70°C with standard seals magnetic or non magnetic piston
  • 5°C – +80°C with FPM seals magnetic piston
  • 5°C – +80°C with HNBR seals magnetic piston
  • 5°C – +120°C with HNBR seals non magnetic piston
  • 5°C – +150°C with FPM seals non magnetic piston

Please follow the suggestions below to ensure a long life for these cylinders:

  • use clean and lubricated air
  • correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod.
  • avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device)
  • evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.)

Please note: air must be dried for applications with lower temperature.

Use hydraulic oils H class (ISO Vg32) for correct continued lubrication. Our Technical Department will be glad to help.

MICROCYLINDERS ACCORDING TO STANDARD ISO 6432 ROLLED END COVERS VERSION – “MIR” & “MIR-INOX”

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th