Add to wishlist

Burkert – Type 2511 – Cable Plug Form A

จุดเด่นของ Type 2511 – Cable Plug Form A

  • Protection class IP 65
  • With integrated AS-Interface connection
  • Simple commissioning and error identification with LED status display
Send Email LINE OA
หมวดหมู่: , , , , , ,

Cable plug with power reducing pulse width modulation

The cable plug, Type 2511, is used to increase the switching pressure for solenoid valves. Power consumption and coil temperature can be significantly reduced during continuous operation. The use of the cable plug is always dependent on the type of solenoid valve used.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 2511

TYPE 2511 สามารถใช้ได้ร่วมกับ

General Technical Data

Product Properties

24 V

110…230 C
Dimensions
 Detailed information can be found in chapter “2. Dimensions” on page 3.
Body material
Polyamide
Polyamide
Cover material
Polyamide
 Polysulfone
Contact material
Polysulfone, gray transparent
 Brass, galvanised silver-plated
Control LED Green No

Electrical Data
Operating voltage
24 V AC/DC / Supply voltage acc. to IEC 364-4-41 (PELV)
110…230 V AC/DC
Inrush power
Max. 72 W
 Max. 72 W
Holding power 4 W 4 W
Duty cycle
Observe correct duty cycle, see chapter “4.1. Duty cycle” on page 4 

Performance Data
Overexcitation time
AC: 400 ms / DC: variable
400 ms
Timeout toff between two switch-on processes  Min. 1 Sek. Min. 1 Sek.
Switching point detection
AC: no / DC: yes
 No
Switching frequency Max. 10/min
Max. 10/min
Contact distance 18 mm acc. to DIN EN 175301-803 Form A 18 mm acc. to DIN EN 175301-803 Form A

Process / Port Connection & Communication
Electrical connection
2-pin terminal strip / Wire cross-section: max. 1.5 mm2 / Cable diameter: 6…7 mm
 3-pin terminal strip / Wire cross-section: max. 1.5 mm2 / Cable diameter: 6…7 mm

Environment and Installation
Operating temperature
– 10 °C…55 °C
– 10 °C…55 °C
Degree of protection IP65 IP65
PE protective conductor contact No Yes
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th