Skip to content
Direct-acting 2/2-way plunger valve
Type 0283 switches without pressure change from zero bar. The direct acting solenoid feed valve is delivered with circuit function A. It is normally closed. Upon switching the magnetic core is tightened against the spring and the valve opens. A filter is built-in to the inlet of Type 0283 2/2 way direct-acting plunger valve. The valve is especially good for switching lowpressure combustible gases.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product Properties
| Housing Material | Brass, stainless steel |
| Seal Material | NBR, FPM |
| Media used with NBR Seal (Neutral Media) | Compressed air, gas, hydrogen, hydraulic oil, oils, and greases without additives |
| Media used with FPM Seal (Neutral Media) | Hot air, oxygen, and hot oils with additives |
| Media Temperature for NBR | -10 to +90°C |
| Media Temperature for FPM | 0 to +100°C |
| Ambient Temperature |
Max. +55 °C
|
| Viscosity |
Max. 21 mm2/s
|
| Thread Connection |
G 3/4 and G 1
|
| Operating Voltages | 24 VUC / 24 or 220-230 V/50Hz / 240 V/50 Hz |
| Voltage Tolerance | ±10 % |
| Nominal Operating Mode | Continuous operation 100% ED |
| Switching Frequency AC | ca. 100-150 / min |
| Switching Frequency UC | max. 6 / min |
| Electrical Connection | Device Socket for Cable Ø 7 mm |
| Degree of Protection | IP65 |
| Installation Position | As required, preferably with actuator upright |
| Weight | 1.2 kg / 1.7 kg |
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th