Skip to content
Many ingredients in the food processing industry are prone to bridging, clinging and clogging because of the high oil or moisture content. The stagnant material slows down production, compromises a company’s recipe, and can even cause cross-batch contamination. That was the problem encountered by Flax4Life, a commercial bakery that produces gluten-free muffins, brownies, and other baked goods. And it was happening at a critical stage when ingredients needed to flow at the right amount, at the right time, into the blending process. After AIRSWEEP, the problem no longer exists.
Problem
Blocks were wasting time, manpower and (literally) material
The company used a vacuum convey system which handled materials at a rate of 6,000 lbs/hour. The incoming ingredients were divided into two receivers: Receiver 1 for sugar, oats and tapioca flour, and Receiver 2 for ground flax and cocoa powder. However, the oils in the flax, compounded by the oil/fat content of the cocoa, as well as the general poor flow properties of both materials allowed the material to not only bridge above the discharge, but also adhere to the vessel walls and cake the interior—all the way up to the filter bags! This led to numerous delays and expensive wastage. They had to throw away up to 40 pounds of mixture a day, and even had to pay to have it hauled away.
All the other material flow aids failed miserably. “The vibrators that came installed on the bottom of the hopper above the mixture practically turned the flax into concrete,” said Stanley Rhea, the maintenance department head at Flax4Life. “Then we installed fluidizers, which were terrible. We still had to use hammers and sticks, and spent an hour a day to clean and keep things flowing.
Solution
Small but powerful
The company contacted Control Concepts about AirSweep® after seeing a Youtube video that demonstrated its effectivity on wet, sticky materials. It installed six AirSweep® VA-06, which was ideal for their small vessel size but still very powerful: each ¾” nozzle could activate up to three feet of material. These were positioned in pairs at the top, center and bottom of the hopper to guarantee continuous flow, and eliminate product caking.
Result
Exceeding expectations at every step
“We have been very successful with Airsweep,” said Rhea. It has solved 90% of their material retention problems. Aside from reducing wastage and improving production speed, they no longer need to climb equipment to dismantle and clean the ingredient receiver.
The company is happy with the results and their customer experience. Added Rhea: “Customer service has been very helpful. I would call with some ideas and they would work with me on it, and they were right! Installation was awesome and easy, and the units have saved the company a lot of man hours. My experience totally exceeded my expectations—a 10 out of 10!”
Contact Flu-Tech for more information:
Tel: 02-384-6060 | Line: @flutech.co.th | Email: [email protected] | Facebook: @flutech.co.th