ข้ามไปยังเนื้อหา
Pneumatic and Automation
จุดเด่นของ SmartMeasurement - ALVT
- Suitable for a wide variety of applications with steam, gas, and liquid medias
- No moving parts and no leak paths; no o-ring or graph oil seals to wear, fail or leak
- Two independent sensors, allowing for better signal amplification and noise reduction
- Error messages displayed for or erratic flows and flows outside of calibrated ranges
- Field calibration possible with integral or remote electronics and keypad
- True 2-wire 4-20 mA interface
- Wide measuring range, turn-down ratio of 30:1
- Can measure at Reynolds Numbers ranging from 10,000 to 7,000,000
- Weatherproof multi-pole connector for power, signal and serial interface
- Area of measurement can be smaller than pipe connection for better rangeability
Pneumatic and Automation
SmartMeasurement – Straight-Tubed Coriolis Mass Flow Meter [ALCM-ST]
จุดเด่นของ SmartMeasurement - ALCM-ST
- Measurement of mass flow, density, temperature & volume flow
- Suitable for aggressive & contaminated media
- Very low pressure drops, only 2″ and 3″ (50mm and 80mm) available
- Operates at temperatures up to 392°F (200°C)
- Individual 8-point calibration including NIST-traceable report
- Optional EX protection
จุดเด่นของ Thermal Dispersion Flow Switch
- Flow switch employing thermal mass flow sensing technique for the detection liquid and gas flow
- No moving parts and no leak paths, no o-rings or graph oil seals to wear, fail, or leak
- Point level switch for liquid level detection
- Wide operating temperature range -100 – 850 °F (-70 – 458 °C)
- Flow Switch range of 0-5 feet/sec (0-1.5 mps) liquids and 0.2-500 feet/sec (0.07 – 150 mps) gases
- Level Switch switches on level change 0.03″ (0.076 cm)
- Fast flow switch response time of 0.5 to 10 seconds (media dependant)
- Level switch response time of 0.1 to 1 second of wetting (media dependent)
- CE, CENELEC and CSA approvals
- Insertion length from ½” to 39⅜” (1.27cm to 100 cm)
Pneumatic and Automation
SmartMeasurement – Turbine Flow Meter Axial Turbine Meter [ALTM]
- High resolution and fast response time; 5 to 50 msec
- Wide temperature range; -4 ~ 230 °F (-20 ~ 110 °C)
- Pressures up to 3,600 psig (250 bars) using optional high-pressure flanges
- Easily cleaned; designed to flush particulates through the meter with the fluid media
- NPT threaded process connection standard, optional BSP threads & flange connections available
- Factory calibrated, traceable to NIST
- Battery-powered display available
- RS-485 and HART communications available
Pneumatic and Automation
SmartMeasurement – U-Tubed Coriolis Mass Flow Meter [ALCM-UT]
จุดเด่นของ SmartMeasurement - ALCM-UT
- Suitable for aggressive & contaminated media
- Measurement of mass flow, density, temperature & volume flow
- Measurement & display of percent water-cut for oil/water mixtures
- Excellent purging & sterilization qualities thanks to a construction that is free of dead-spots
- High rotation frequency & well-balanced measuring tubes
- Operating temperatures up to 575°F (300°C)
- Individual 8-point calibration including NIST-traceable report
- Optional EX protection
Pneumatic and Automation
SmartMeasurement – Ultrasonic Clamped-on Flowmeter ALSONIC-MN2 series
Pneumatic and Automation
SmartMeasurement – Ultrasonic Meter with BTU Measurement [ALSONIC-EG]
จุดเด่นของ SmartMeasurement - ALSONIC-EG
- Measures energy consumption rate and total
- Compact or wall mount version
- Proven ultrasonic technology for flow measurement and reliable PT 100 RTDs for temperature measurement
- Clamp-on, spool piece or insertion mounting for flow measurement
- Wide range of fluid velocities – 0.03 ~ ± 105 feet/sec.
- Transducers for pipe sizes ranging from ½” to 240″ (13 to 6000 mm)
- High accuracy – ±0.5% of reading
- RS485 and Modbus communication protocols available
- 4-20 mA and pulse outputs with available relays and alarms
- Data logger function – includes time & date, totalizer, diagnostics
- Fast response time – less than 1 second
- NIST traceable calibration certificate