ข้ามไปยังเนื้อหา
Pneumatic and Automation
SmartMeasurement – Portable Ultrasonic Flow and Energy Meter [ALSONIC-PL]
- 2 line LCD display with flow rate, totalizer & diagnostics
- Stores up 512 days of data w/recording interval of 1 to 3600 seconds
- Velocity range of ±0.98 ft/s~±32 ft/s (±0.1 ~±10 m/s)
- Pipe sizes from 1-48″ (25~1200) mm
- Bracket-type transducers for easy installation without mounting belt
- Data logger includes date, totalizer, signal condition & diagnostic code status
- Response time of less than 1 second
จุดเด่นของ Thermal Dispersion Flow Switch
- Direct mass flow measurement of any gas with actual gas calibration
- Portability, with up to 10 Hours of rechargeable battery operation
- Data logging of gas mass flow rates with up to 3800 data points
- Up to 16 unique calibrations or applications can be programmed onto a handheld unit
- Easily transfers data into Excel spreadsheets
- Tracking of overall gas consumption over a turndown ratio of at least 100:1
- Graphical bar representing the flow rate
- OLED display shows Flow, Temperature, Log#, Channel ID, Date & Time Stamps
- 8-character TAG IDs defining specific pipe locations
- No moving parts, and negligible pressure drop
- Configurable via Keypad or using Addresser software (included)
Pneumatic and Automation
SmartMeasurement – Small Size Low Flow Magnetic Flow Meter [ALMAGMINI] ALMAG-MN
- Liners of PE, Peek or Ceramic
- Fluid velocity range of 0.01m/s – 10m/s, ideal for flow applications
- ½” NPT or BSP process connections
- Ideal for extremely low flow applications
- Features a built in PT1000 temperature sensor; 0.1°F resolution
- Available with SS #316L or Hastelloy C electrodes
- High accuracy – ±0.5% of reading (Velocity > 0.6m/s) or ±3mm/s (Velocity ≤ 0.6m/s)
- Available with 4-20mA and 0-5KHz pulse and 2A relay outputs
- RS485 MODBUS; Optional for version w/ display, standard for blind version
Pneumatic and Automation
จุดเด่นของ SmartMeasurement - ALVT
- Suitable for a wide variety of applications with steam, gas, and liquid medias
- No moving parts and no leak paths; no o-ring or graph oil seals to wear, fail or leak
- Two independent sensors, allowing for better signal amplification and noise reduction
- Error messages displayed for or erratic flows and flows outside of calibrated ranges
- Field calibration possible with integral or remote electronics and keypad
- True 2-wire 4-20 mA interface
- Wide measuring range, turn-down ratio of 30:1
- Can measure at Reynolds Numbers ranging from 10,000 to 7,000,000
- Weatherproof multi-pole connector for power, signal and serial interface
- Area of measurement can be smaller than pipe connection for better rangeability
Pneumatic and Automation
SmartMeasurement – Straight-Tubed Coriolis Mass Flow Meter [ALCM-ST]
จุดเด่นของ SmartMeasurement - ALCM-ST
- Measurement of mass flow, density, temperature & volume flow
- Suitable for aggressive & contaminated media
- Very low pressure drops, only 2″ and 3″ (50mm and 80mm) available
- Operates at temperatures up to 392°F (200°C)
- Individual 8-point calibration including NIST-traceable report
- Optional EX protection
จุดเด่นของ Thermal Dispersion Flow Switch
- Flow switch employing thermal mass flow sensing technique for the detection liquid and gas flow
- No moving parts and no leak paths, no o-rings or graph oil seals to wear, fail, or leak
- Point level switch for liquid level detection
- Wide operating temperature range -100 – 850 °F (-70 – 458 °C)
- Flow Switch range of 0-5 feet/sec (0-1.5 mps) liquids and 0.2-500 feet/sec (0.07 – 150 mps) gases
- Level Switch switches on level change 0.03″ (0.076 cm)
- Fast flow switch response time of 0.5 to 10 seconds (media dependant)
- Level switch response time of 0.1 to 1 second of wetting (media dependent)
- CE, CENELEC and CSA approvals
- Insertion length from ½” to 39⅜” (1.27cm to 100 cm)
Pneumatic and Automation
SmartMeasurement – Turbine Flow Meter Axial Turbine Meter [ALTM]
- High resolution and fast response time; 5 to 50 msec
- Wide temperature range; -4 ~ 230 °F (-20 ~ 110 °C)
- Pressures up to 3,600 psig (250 bars) using optional high-pressure flanges
- Easily cleaned; designed to flush particulates through the meter with the fluid media
- NPT threaded process connection standard, optional BSP threads & flange connections available
- Factory calibrated, traceable to NIST
- Battery-powered display available
- RS-485 and HART communications available