Skip to content
Pneumatic and Automation
SmartMeasurement – High Pressured Magnetic Flow Meter [ALMAG-HP]
จุดเด่นของ SmartMeasurement - ALMAGHP
- Various liner/electrode material combinations can be selected in order to make this high pressure mag meter chemically compatibility with different fluids
- Capable of measuring fluid velocities of up to 40 feet/second (12 m/s), with a high turndown ratio
- Flange-type process connections are standard; ANSI, DIN, JIS styles available
- Suitable for high pressure operation in excess of 6000 psig
- IP68 protection class for submersible operation
- Available FEP liner suitable for vacuum conditions
- High accuracy – ±0.5% of reading (standard) or ±0.2% of range
- Diagnostic features alert the user to empty pipe or reverse flow conditions
Pneumatic and Automation
จุดเด่นของ SmartMeasurement - ALMAG-IS
- Applicable sizes: 2″~120″ (50~3000 mm)
- Operating pressure: = 230 psig (1.6MPa) max.
- Velocity range of 3-33 fps (1~10m/s)
- Accuracy: ±1.5%
- Hot-tap ball valve option allows sensor to be installed and retracted from process piping without shutting down the process
- Conductivity of measured medium: ≥ 20 μs/cm
- Electrode materials: 316L, Hastelloy, Ti, Ni, Tantalum
- Max. distance between sensor and converter: 165 feet (50 m)
- NIST traceable calibration certificate
Pneumatic and Automation
SmartMeasurement – Insertion Style Dispersion Flow Meter [ATMF-IS]
จุดเด่นของ SmartMeasurement - ATMF-IS
- Direct mass flow measurement of any gas with actual gas calibration
- Opto-isolated outputs, with graphic display
- Tracking of overall gas consumption over a turndown ratio of at least 100:1
- Up to four in-dependent switch able flow curves
- high contrast photo-emissive OLED display with rate,total, temperature and graphic display
- Selectable engineering units, dynamically converts the flow rate and total flow
- Can measure higher velocity than any other thermal mass meter - up to 203 m/s
- Display calibration milliwatt (mw) for ongoing diagonostics
- Standard software available multi-curve fit programs
- Low power dissipation under 2W
- Low cost SA option for Air, O2 and N2 ONLY (0.3Nm/s～60Nm/s)
Pneumatic and Automation
SmartMeasurement – Insertion Style Dispersion Flow Meter [ATMFIL]
จุดเด่นของ SmartMeasurement - ATMFIL
- Direct mass flow measurement of any gas with actual gas calibration
- Opto-isolated outputs, with graphic display
- Tracking of overall gas consumption over a turndown ratio of at least 100:1
- Up to four independent, switchable flow curves
- High contrast photo-emissive OLED display with rate, total, temperature and graphic display
- User-selectable engineering units, dynamically converts the flow rate and total flow
- Can measure higher velocity than any other thermal mass meter – up to 203 m/s
- Display calibration milliwatt (mw) for ongoing diagnostics
- Standard software available multi-curve fit programs
- Low power dissipation under 2W
- Flow condioners included with all meters
Pneumatic and Automation
SmartMeasurement – Low Cost Turbine Flow Meter – Axial Turbine Meter [ALTM-T]
จุดเด่นของ SmartMeasurement - ALTM-T
- High resolution and fast response time; 5 to 50 msec
- Wide temperature range; -4 ~ 230 °F (-20 ~ 110 °C)
- Pressures up to 3,600 psig (250 bars) using optional high-pressure flanges
- Easily cleaned; designed to flush particulates through the meter with the fluid media
- NPT threaded process connection standard, optional BSP threads & flange connections available
- Factory calibrated, traceable to NIST
- Battery-powered display available
- RS-485 and HART communicaitons available
Pneumatic and Automation
SmartMeasurement – Low flow Small size Ultrasonic Flow Meter [ALSONIC-MINI]
จุดเด่นของ SmartMeasurement - ALSONIC-MINI
- Available in ¼” – 3″ (8-80 mm) pipe sizes
- Will measure a wide range of fluid velocities; 0.3-16.5 f/s (0.1 ~5.0) m/s
- Data logger includes daily, monthly and total
- Outputs include 4-20mA, alarms and MODBUS RTU
- Suitable pipe materials including stainless steel, carbon steel, copper, PVC, PVDF, polypropylene and HDPE.
- Accuracy; ±2% of reading
- Energy and BTU measurement optional
- NIST traceable calibration certificate
Pneumatic and Automation
จุดเด่นของ SmartMeasurement - ALVAMT
- Versatile design may be used for gas, steam, and liquids
- High resolution and fast response time; – 5 to 50 msec
- Wide temperature range from -40 up to 750 °F (-40 to 400 °C)
- High pressure operation up to 6100 psi (420 bar)
- Process connections including NPT threads, ANSI flanged, & Tri-Clamp available
- Electronics either intrinsically safe EEx ia II CT5, or Ex proof EEx d II CT6
- Wide array of materials available including Hastelloy B & C,Ti, Cu, Al, etc..
- PTFE and other liner materials available
- NIST-traceable calibration