Skip to content
Externally Piloted Regulators
Master Pneumatic – PRH180M High Flow Vanguard 3/4, 1, 1-1/4 and 1-1/2
จุดเด่นของ PRH180M High Flow Vanguard 3/4, 1, 1-1/4 and 1-1/2
- High Flow External Relief Pilot valves separate control air from exhaust air.
- Inline mounting.
- Diaphragm-type design.
- Self-relieving.
- Pressure gauge.
- NPTF port threads; optional BSPP threads.
- @ 80 psi with 15 psi back pressure the relief is 10 scfm.
Master Pneumatic
A PULSE COUNTER for Multiple Point Lubricators can be set to actuate Servo-Meters on every operating cycle, every 5th cycle, or every 10th cycle. Counter Kit KA418-04M includes a counter, all necessary seals and hardware for mounting.
General Purpose Regulators
Master Pneumatic – R100 Full Size Vanguard Modular Regulator 1/4, 3/8, 1/2 and 3/4
- Modular or inline mounting.
- Diaphragm-type design.
- Self-relieving; non-relieving optional.
- Pressure gauge.
- Pressure adjustment locking key.
- NPTF port threads; optional BSPP threads.
FRL Heavy Industrial
Master Pneumatic – R10M, R11M Sentry Modular 1/8, 1/4 and Tube Fittings
- Inline mounting
- Avaliable in relieving and non-relieving diaphragm designs.
- Outstanding control at a relatively low cost
- Pressure gauge optional
- NPTF port threads; optional BSPP threads
Master Pneumatic
จุดเด่นของ R13M R14M Sentry Acetal-Body 1/8 and 1/4
- Designed to set pilot pressure of the water for the main valve in a sprinkler system. See diagram below.
- Piston-type design (R13M models) or diaphragm-type (R14M models).
- Non-relieving.
- Corrosion-resistant construction.
- Optional large valve seat for water flows up to six gallons per minute.
- Threaded ports or quick-connect fittings for tubing up to 10 mm in diameter.
- NPTF port threads; optional BSPP threads.
FRL Heavy Industrial
Master Pneumatic – R180 High-Flow Vanguard Regulator 1-1/4 and 1-1/2
- Inline mounting.
- Piston-type design.
- Self-relieving; non-relieving optional.
- Pressure gauge.
- Pressure adjustment locking key.
- NPTF port threads; optional BSPP threads.
FRL Heavy Industrial
Master Pneumatic – R180M High-Flow Vanguard Regulator 3/4 and 1
- Inline mounting.
- Piston-type design.
- Self-relieving; non-relieving optional.
- Pressure gauge.
- Pressure adjustment locking key.
- NPTF port threads; optional BSPP threads.