ข้ามไปยังเนื้อหา
Inline Sensor Fitting with Paddle Wheel for Flow Measurement
The sensor-fitting Type S030 has a built-in paddle wheel to measure the flow rate and is especially designed for use with neutral, slightly aggressive, solid free liquids. The compact sensor-fitting (S030) must be equipped with a Bürkert transmitter (SE30, SE30 Ex, SE32, SE35, SE36 or 8611) quickly and easily connected together by a bayonet catch. The Bürkert “Inline quarter-turn” technology is a construction ensuring a leakage free operation. The paddle wheel rotation (permanent magnets included in the wheels) is detected contactless through the sensor-fitting wall. The transmitter can be snapped-on or removed without opening the pipe or interrupting the process.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
General Technical Data
Product properties |
|
| Material | Please make sure the device materials are compatible with the fluid you are using. Detailed information can be found in chapter “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 5. |
| Wetted parts | |
| Body, sensor armature Seal | Stainless steel (316L – 1.4404), brass (CuZn39Pb2), PVC, PP or PVDF (depending on S030 version) |
| Seal | FKM or EPDM (depending on S030 version). Detailed information can be found in chapter “11.4. Ordering chart” on page 17 |
| Axis | Ceramics (Al2O3) |
| Bearings | • Ceramics (Al2O3) • Iglidur® (only for S030-HT) |
| Paddle wheel | • PVDF • Stainless steel (316L – 1.4404) (only for S030-HT) • PP on request |
| Screws | Stainless steel (316L – 1.4404) |
| Dimensions | Detailed information can be found in chapter “4. Dimensions” on page 6 |
| Compatibility | • With flow transmitter Type SE30, SE30 Ex, SE32, SE35, SE36, batch controller SE35 or 8611 Univer-sal controller • Only with flow transmitter Type SE30-HT for S030-HT versions |
| Pipe diameter | DN 06…DN 65 |
Performance data |
|
| Measuring range | 0.5…1200 l/min |
| Measurement deviation | • Teach-In (via a remote transmitter): ± 1 % of the measured value1.) (at Teach-In flow rate value) • Standard K-factor: ± 2.5 % of the measured value1.) |
| Linearity | ± 0.5 % of full scale1.) |
| Repeatability | ± 0.4 % of the measured value1.) |
Medium data |
|
| Fluid | Clean, neutral or slightly aggressive, solid-free liquids |
| Viscosity | 300 cSt. max. |
| Rate of solid particles | Max. 1 % |
| Maximum particle size | 0.5 mm |
| Velocity | • 0.3…10 m/s • 0.5…10 m/s (only for S030-HT) Detailed information can be found in chapter “6.2. Selection of the nominal diameter” on page 12. |
| Fluid temperature | For sensor-fitting in • PVC: 0…+ 50 °C (+ 32…+ 122 °F) • PP: 0…+ 80 °C (+ 32…+ 176 °F) • Stainless steel, brass or PVDF: – 15…+ 100 °C (+ 5…+ 212 °F) • Stainless steel (S030-HT): – 15…+ 125 °C (+ 5…+ 257 °F) |
Approvals and Certificates |
|
| Directives CE directives |
The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable). |
| Pressure equipment directives | Complying with Article 4, Paragraph 1 of 2014/68/EU directive. Detailed information on the pressure equipment directive can be found in chapter “2.2. Pressure Equipment Directive” on page 4. |
| Certificates | Certificates must be ordered separately. Detailed information can be found in chapter “11.5. Ordering chart accessories” on page 19 • Inspection certificate 3.1 (acc. to EN-ISO 10204) • Test report 2.2 (acc. to EN-ISO 10204) • Certification of Conformity for the surface Quality (DIN4762-DIN4768-ISO/4287/1) • 3 points Flow calibration certificate • FDA declaration of conformity (see “2.1. Certification FDA” on page 4) |
Environment and installation |
|
| Ambient temperature | Operation and storage for sensor-fitting in • PVC: – 15…+ 60 °C (+ 5…+ 122 °F) • PP: – 15…+ 80 °C (+ 5…+ 176 °F) • Stainless steel, brass or PVDF: – 15…+ 100 °C (+ 5…+ 212 °F) Temperature limits may depend on the used transmitter. Refer to the relevant data sheet or instruction manual for more details. |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th