Skip to content
Nitrate sensor
The sensor Type MS09 is an optical sensor for absorption measurement in the UV range to determine the nitrate content in drinking water.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE ms09 สามารถใช้ได้ร่วมกับ
General Technical Data Type MS09
Product properties |
|
| Material | Please make sure the device materials are compatible with the fluid you are using. Detailed information can be found in chapter “2.1. Chemical Resistance Chart – Bürkert resistApp” on page 5. |
| Photometer | Housing in stainless steel (1.4571/1.4404) |
| Flow cell | • Housing in POM • Seal in NBR • Screw in stainless steel 316 (A4) |
| büS interface | • Front side housing: PC (Polycarbonate) • Rear side housing: polyurethane potting resin, natural |
| Fixed connector and cable | • Cable in PUR • Screw connection in Zinc die casting, matte nickel-plated |
| Dimensions | Detailed information can be found in chapter “3. Dimensions” on page 5. |
| Photometer | 469 x 48.3 mm (L x Ø ) with a 5 mm path |
| Flow cell | 108 x 65 x 65 mm |
| büS interface | 210 x 65 x 18 mm |
| Weight | |
| Photometer | Approx. 3.20 kg |
| Flow cell | Approx. 0.65 kg |
| büS interface | Approx. 0.40 kg |
| Compatibility | With Online Analysis System Type 8905 Detailed information can be found in the data sheet of the online analysis system, see data sheet Type 8905 for more information. |
| Measurement technology | Photometry • Light source: Xenon flash lamp • Detector: 3 photodiodes + filter |
| Measurement principle | Attenuation |
| Optical path | 5 mm (others on request) |
| Measured variable | NO3 |
| Measuring range | 0.44…53 mg/l with a 5 mm path |
| Compensation | Turbidity |
| Data-logger | |
| büS interface | Micro SD card (not included in delivery) (for storage of device parameters, configuration and for easy replacement of photometer) |
| Calibration/maintenance interval | 24 months |
| Performance data | |
| Nitrate measurement | |
| Measurement deviation | ±(5 % + 0.88) of the measured value |
| Measurement interval | ≥ 10 s |
| Response time (t100) | 10 s |
| Electrical data | |
| Operating voltage | |
| Photometer | 24 V DC ± 10 % (through connector X8 of büS interface) |
| büS interface | 24 V DC ± 10 % – residual ripple 10 %1.) (through connector X4 connected to Online Analysis System Type 8905. Detailed information can be found in the data sheet of the Online analysis system, see data sheet Type 8905 for more information.) |
| Power consumption | |
| Photometer | ≤ 7 W |
| büS interface | ≤ 2 W (of module alone) |
| Current | |
| büS interface | • Max. input current: 4 A for supply via X4 (M12, A-coded, plug) • Max. output current: 4 A in total with supply via X4 |
| Output | |
| Photometer | Ethernet (TCP/IP) |
| büS interface | Bürkert büS |
Medium data |
|
| Fluid | Water without particles: drinking water, industrial water |
| Sample water | |
| Temperature | + 2…+ 40 °C (+ 36…+ 104 °F) |
| Pressure | • Photometer alone: 3 bar • With flow cell: ≤ 1 bar |
| Flow rate | With flow cell: 2…4 l/min |
| Inflow velocity | 0.1…10 m/s (0.33…33 fps) |
Process/Port connection & communication |
|
| Process connection | Hose connections of flow cell (6 or 8-mm inlet, 6-mm outlet) |
| Electrical connection | M12 male plug, A-coded (X4 (IN)) of büS interface |
| Data transfer | |
| Internal communication | • Through büS (Bürkert system bus, CANopen protocol) • By status LED: with RGB-LED based on NAMUR NE 107 on the büS interface |
| Approvals and Certificates | |
| Photometer | IP68 according to IEC/EN 60529, NEMA 6P |
| büS interface | IP65, IP67 and IP69k according to EN/IEC 60529 (with cables connected and with protective caps on unused connections) |
| Directives CE directives | The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable). |
Environment and installation |
|
| Ambient temperature Operating | |
| Photometer | • Operating: + 2…+ 40 °C (+ 36…+ 104 °F) • Storage: – 20…+ 80 °C (- 4…+ 176 °F) |
| • Operating: – 20…60 °C (- 4…+ 140 °F) • Storage: – 20…70 °C(- 4…+ 158 °F) |
|
| Relative air humidity | ≤ 90 %, without condensation |
| Height above sea level | Max. 2000 m |
| Operating condition | Continuous |
| Equipment mobility | Fixed |
| Application range | Indoor and outdoor (Protect the device against electromagnetic interference, ultraviolet rays and, when installed outdoors, against the effects of climatic conditions) |
| Installation category | Category I according to UL/EN 61010-1 |
| Pollution degree | Degree 2 according to UL/EN 61010-1 |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th