Add to wishlist
Burkert - Type 8703 - Mass Flow Meter (MFM) for Gases
Burkert - Type 8703 - Mass Flow Meter (MFM) for Gases - Image 2
Burkert - Type 8703 - Mass Flow Meter (MFM) for Gases - Image 3
Burkert - Type 8703 - Mass Flow Meter (MFM) for Gases

Burkert – Type 8703 – Mass Flow Meter (MFM) for Gases

จุดเด่นของ Type 8703

  • High accuracy
  • Compact version
  • Very fast response times
  • Digital communication via RS485
  • Nominal flow ranges from 0.010 l/min to 80 l/min
Send Email LINE OA
หมวดหมู่: ,

Mass Flow Meter (MFM) for Gases

The mass flow meter (MFM) type 8703 is suited for measuring the mass flow of gases over a big flow range. The thermal MEMS sensor is located directly in the gas stream and therefore reaches very fast response times. Type 8703 can optionally be calibrated for two different gases; the user can switch between these two gases. The communication with master devices is fully digital, therefore no further analog/digital conversions are needed.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 8703

TYPE 8703 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Materials  
Block Aluminium or stainless steel
Body Metal
Seal FKM, EPDM
Dimensions Detailed information can be found in chapter “3. Dimensions” on page 4.
Total weight approx. 500 g (Aluminium)
LED display Indication for power, limit and error

Performance data

  
Nominal flow range (QNom) 10 mlN/min…80 lN/min (N2)
Detailed information can be found in chapter “6.2. Flow characteristic” on page 7.
Measuring range 1:50 (2…100 %), higher measuring range on request
Max. operating pressure 10 bar (145 psi)
Measuring accuracy ± 0.8 % o. R. ± 0.3 % F. S. (after 1 min. warm-up time)
Repeatability ± 0.1 % F. S.
Response time (t95 %) < 300 ms

Electrical data
Operating voltage 24 V DC
Power consumption 5 W
Voltage tolerance ± 10 %
Residual ripple < 2 %
Electrical connection Plug D-Sub 9 pin

Medium data
Operating medium Neutral, non-contaminated gases, others on request
Calibration medium Operating gas or air (with conversion factor)
Medium temperature – 10 °C…+ 70 °C
(- 10 °C…+ 60 °C for oxygen)

Process/Port connection & communication
Port connection NPT ¼, G ¼, screw-in fitting or sub-base, others on request
Fieldbus option PROFIBUS DP, CANopen
Digitale Outputs Relay outputs
1. Limit (QNom almost reached) Load capacity: 25 V, 1 A, 25 VA
Digital inputs Not connected
Digital (communication) interface Digital via RS485 (Half-duplex or full duplex), RS422

Environment and installation
Ambient temperature – 10 °C…+ 50 °C
Installation Horizontal or vertical
Degree of protection IP40

*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th