Add to wishlist
Burkert-Type 6650 - 2-2 way Flipper-Solenoid Valve with separating diaphragm
Burkert-Type 6650 - 2-2 way Flipper-Solenoid Valve with separating diaphragm
Burkert-Type 6650 - 2-2 way Flipper-Solenoid Valve with separating diaphragm
Burkert-Type 6650 - 2-2 way Flipper-Solenoid Valve with separating diaphragm

Burkert – Type 6650 2/2 way Flipper-Solenoid Valve with separating diaphragm

จุดเด่นของ Type 6650

  • Direct-acting
  • Only 4.5 mm wide
  • Vacuum up to 7 bar
  • Short response times
  • Medium isolation, for aggressive fluids
Send Email LINE OA
หมวดหมู่:

2/2 way Flipper-Solenoid Valve with separating diaphragm

With a width of only 4.5mm, Type 6650 sets a new standard in medium isolation miniature solenoid valves. The optimized design enables reproducible and precise dosing, good rinsing capability and is suitable for the application of aggressive chemicals owing to the high quality of the materials used. With the two nominal sizes of 0.4 and 0.8mm it is ideal for applications where the highest fluid performances are required in the smallest space. Type 6650 opens up new possibilities, owing to the 4.5mm station width, in particular in connection with dosing in 384-well microtiterplates. Based on the well-known flipper principle of the Type 0330, it is tied to the success history of the legendary Type 127.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

type 6650

BURKERT TYPE 6650 สามารถใช้ได้ร่วมกับ

General Technical Data

Product properties
Dimensions Detailed information can be found in chapter “4. Dimensions” on page 4.
Material
Seal FFKM (Simriz)
Body PEEK
Internal volume
Fluid chamber Ca. 30 µl
2/2 way Ca. 37 µl
Nominal diameter DN 0.4 and DN 0.8
Performance data
Switching times < 5 ms (acc. to ISO 12238)

Electrical data
Operating voltage 24 V (12 V on request)
Voltage tolerance ± 10 %
Duty cycle 100 % continuous operation only with external power reduction1.)
Switching frequency 80 Hz (for mechanical limit observe maximum temperature)1.) 15 Hz (continuous only with external power reduction)1.)
Nominal power 5.7 W inrush power
0.7 W holding power with power reduction. For 100 % duty cycle the power must be reduced externally. Uniform polarity must be ensured when aligning the devices 1.) For details on power electronics, see chapter “4.2. Cable plug type 2504 with inte-grated booster and power reduction electronics” on page 5.

Medium data
Medium temperature + 15 °C…+ 50 °C
Operating medium Resistant to neutral and aggressive fluids and gases, see chapter “3.1. Chemical Resistance Chart – Bürkert resistApp” on page 4.

Process/Port connection & communication
Port connection Flange
Electrical connection Cable plug Type 2504

Environment and installation
Ambient temperature + 10 to + 50 °C
Installation position As required, with side by side connection standard polarity is adhered to
Degree of protection IP65
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.

สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :

  02-384-6060 (อัตโนมัติ)    [email protected]    บริษัท ฟลูเทค จำกัด Flu-tech    @flutech.co.th