ข้ามไปยังเนื้อหา
Standard Vortex Flow Meter the number of vortex pulses generated by a bluff body immersed in the flow stream. The SMC Vortex meter uses dual sensor technology, producing two independent vortex signals which allow for signal amplification and common mode noise reduction.
Our sensors never touch the process fluid; the crystal sensors are bonded behind a stainless steel wall. The electronics pick up the slightest pressure pulsations generated by the vortices through the stainless steel wall. This design allows meters to have an extremely wide turndown while maintaining an almost unlimited upper end and a high pressure rating.
Request a quote today or Contact Flutech to learn more about our Vortex flow meters.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
Features
- Suitable for a wide variety of applications having steam, gas, or liquid medias
- No moving parts and no leak paths; no o-ring or graph oil seals to wear, fail or leak
- Two independent sensors, allowing for better signal amplification and noise reduction
- Error messages displayed for erratic flows and flows outside of calibrated ranges
- Field calibration possible with integral or remote electronics and keypad
- True 2-wire 4-20 mA interface
- Wide measuring range, turn-down ratio of 10:1
- Available as an integrated mass flow vortex
- Area of measurement can be smaller than pipe connection for better rangeability
Specifications
Process Connections: | Wafer (standard), Flanged |
Process temperature: | -20~+180°F (-5~+250°C) (with LCD display) |
Operating pressure: | 232 psig (1.6MPa) standard; up to (428 psig) 6.4 MPa optional |
Velocity Range: | Depends on fluid, pressure and temperature |
Liquids: Gas & Steam: | 2~20 ft/s (0.6~6 m/s) 23~148 ft/s (5~65 m/s) |
Accuracy | 1.0% for liquid, 1.5% for gas and steam |
Repeatability: | 0.33% for liquid, 0.5% for gas |
Turn down ratio | 10:1 |
Material: | Stainless Steel #304 |
Signal output: | Pulse output, 2-wire 4~20mA DC, VDC, RS485, Hart, ModBus |
RAM Back-up | Lithium Battery, 3.6VDC |
Housing protection: | IP65; IP67 |
Cable: | 10 m free for remote version |
weight (approximate): | Wafer: 22~29 lbs (10 ~ 13kg) to 12" (DN300) Flange: Flange weight contact factory |
Signal Interface | RS485, HART |
Display units: | m3/h, kg/hr |
Keypad: | Rate, Total |
Power supply: | 110/220 VAC or isolated 14~36 VDC |
NIST traceable: | Yes |
Data storage: | EPROM storage up to 5 years |
Data logger: | Reading, sampling times 0.5 S |
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th