Skip to content
Reagent unit
The reagent unit supplies the flow injection analysis within a Type 8905 system with the correct reagents. Up to three reagents are stored in a bottle holder for this.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
BURKERT TYPE mz30 สามารถใช้ได้ร่วมกับ
-
Burkert - Type 8905 Online water analysis system
-
Burkert - Type MS06 - Flow Injection Analysis (FIA) Sensor Cube for Iron Content
General Technical Data
Product properties |
|
| Material | Please make sure the device materials are compatible with the fluid you are using. Detailed information can be found in chapter “2.1. Chemical Resistance Chart – Bürkert resistApp” on page 4. |
| Housing (if applicable) | Polycarbonate |
| Bottle holder | Powder-coated steel |
| Hoses | Silicone, Polyurethane |
| Spiral coiled tube | PE |
| Wetted parts | |
| Seals | FKM |
| Bottles and bottle covers | PE |
| Hoses | PFA or PE |
| Waste hose | PFA |
| Dimensions | Detailed information can be found in chapter “3. Dimensions” on page 4. |
| Weight | 1.42 kg |
| Measuring principle | Level meter (0…250 ml) and barcode detection1.) (Bürkert specific barcode) |
| Temperature sensor | Pt1000 |
| Sensor | Weight sensors factory calibrated, Barcode-scanner1.) |
| Compatibility | With iron measuring module Type MS06 and Online Analysis System Type 8905 See data sheet Type MS06 and data sheet Type 8905 for more information. |
Performance data |
|
| Measuring range resolution1.) | < 1 ml |
| Measurement deviation1.) | 2 ml |
Electrical data |
|
| Operating voltage | 24 V DC through the backplane of the system Type 8905 via büS |
| Power consumption | Max. 1.1 W |
Medium data |
|
| Supplies | Reagent, calibration standard and cleaning solution in 250 ml bottle Detailed information can be found in chapter “7.4. Ordering chart accessories” on page 7 and see also data sheet Type MS06 for more information. |
Process/Port connection & communication |
|
| Process connection | Tubing (integrated into product) |
| Electrical connection | M12 connector |
| Data transfer | |
| Internal communication | Through büS (Bürkert bus, CAN–Protocole) |
Approvals and Certificates |
|
| Degree of protection according to IEC/EN 60529 | • IP65, when installed in the 8905 housing • IP20, as standalone product without housing |
| Directives CE directives | The applied standards, which verify conformity with the EU Directives, can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applica-ble). |
Environment and installation |
|
| Ambient temperature Operating | + 10…+ 40 °C (+ 50…+ 104 °F), 20 °C (68 °F) recommended – 10…+ 60 °C (+ 14…+ 140 °F), only without reagents |
| Storage and transport | • Used iron measuring module: + 10…+ 30 °C (+ 50…+ 86 °F) • For empty/purged sensor cube: – 10…+ 60 °C (+ 14…+ 140 °F) |
| Relative air humidity | ≤ 90 %, without condensation |
| Height above sea level | Max. 2000 m |
| Operating condition | Continuous |
| Equipment mobility | Fixed |
| Application range | Indoor and outdoor (Protect the device against electromagnetic interference, ultraviolet rays and, when installed outdoors, against the effects of climatic conditions) |
| Installation category | Category I according to UL/EN 61010-1 |
| Pollution degree | Degree 2 according to UL/EN 61010-1 |
*For selecting thecorrect product please refer to the technical data, images and notes for proper use according to the data sheet, or contact Flu-Tech directly.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th