PNEUMAX – วาล์วควบคุมการไหล Series 600

PNEUMAX – วาล์วควบคุมการไหล Series 600

These accessories are a range of devices for completing a pneumatic circuit. these valves, with their special functions, are inserted between two valves, between a valve and a cylinder, or following a cylinder.

One of the particular characteristic of these accessories is that they are automatically actuated without the need for external commands. usually, operation and idle are controlled by the presence or absence of pressure as, for example, in the case of quick exhaust valves which pilots itself as a selector, changing the flow direction as the signal goes off and on.

DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)

We have not listed all different materials used for the construction of these components because the list would be too the long. We use corrosion proof material, brass or anodized aluminium and the most appropriate specific mixture for seals.
If more information is required please contact our technical department.

In operation pay attention to the minimum and maximum criteria for temperature and pressure, and ensure good quality compressed air. In a dirty environment, protect the exhaust ports.
In this case, maintenance is minimal and is necessary only if the air is particularly dirty.
The components most subject to damage by the accumulation of dirt are flow regulators with fine regulation and silencers. As for regulators, follow the normal procedure for disassembling, washing with non-chemical cleaning agents and remounting. The silencers need only to be rinsed in petrol or solvent and blown dry with compressed air.
The number of requests for spare seals for flow regulators and shuttle valves are statistically irrelevant. More often, it is necessary to replace the lining of the quick exhaust because of the wear it undergoes due to the particular conditions of operating.
ATTENTION: use hydraulic oil class H for lubrication such as MAGNA GC 32 (Castrol).