Skip to content
PNEUMAX – SERIES 1450-1463 HYDRO-PNEUMATIC CYLINDERS
The hydro-pneumatic series according to ISO 6431 standard is the result of years of experience in manufacturing pneumatic cylinders and hydraulic units.
PNEUMAX – SERIES 1450-1463
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
SERIES 1450-1463General
Pneumatic cylinder ISO 15552 handling and controlling movement by means of internal hydraulic circuit. All ISO fixing devices can be used except for:
- Cylinder Ø63 front clevis code 1463.63.08F
- Cylinder Ø63 front flange code 1463.63.03F
- Cylinder Ø63 foot code 1463.63.05/1F
Construction characteristic
| End cap | Aluminium black anodised |
| Piston Rod | Steel tube externally chrome plated |
| Barrel | Aluminium alloy anodised |
| Magnetic piston | Aluminium |
| Cushion screw | Nickel plated steel |
| Pneumatic piston seal (pneumatic side) | Oil resitant NBR rubber |
| Rod and cushion seal | PUR |
| Hydraulic piston seal (hydraulic side) | PUR |
Technical characteristics
| Pneumatic media | filtered and lubricated air |
| Hydraulic media | filtered 1µ hydraulic oil |
| Maximum pressure | 8 bar |
| Skip & Stop valve minimum operating pressure | 3 bar |
| Environment temperature | -5°C +70°C |
| Minimum regulated speed | 40 mm/min. |
| Maximum regulated speed | 6000 mm/min. * |
| Speed with SKIP | 150 mm/sec. * |
| Free speed (without regulation) | 300 mm/sec. * |
| Cushion speed | 20 mm * |
| Standard stroke | from 50 to 450 steps 50 mm |
| Possibility of rear regulation (on request) |
* Attenction: speed recorded with cylinder on horizontal position fed at 8 bar without load on piston rod.
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th
You must be logged in to post a comment.