Skip to content
Pneumatic gripper clamps with fully adjustment opening angle JP40 Series
Toggle-joint mechanism
Pneumatic Compact gripper clamps with toggle-joint mechanism, to secure the workpiece clamping in case of air loss: the jaws remain locked in closed position.
Mainly used to hold the workpiece on edges or through holes − from above or below − and to transfer parts.
The shortest set-up time in the market
Easy field adjustment of the opening angle, from the rear or front side of the gripper clamp with the shortest set-up time in the market.
DOWNLOAD CATALOG (ดาวน์โหลดแคตตาล็อก)
Technical features
Manual release button to open the linkage when air pressure is removed during setup. Pneumatic ports on both sides of the cylinder. | |
Operating pressure | from 2 to 8 bar / from 30 to 115 psi |
Lubrication | all the devices are lubricated for life at the factory. Inline air lubrication isn’t required |
JP40E / Gripper clamp – Size 40 mm
สอบถามข้อมูลเพิ่มเติม ติดต่อเรา :
02-384-6060 (อัตโนมัติ) [email protected] บริษัท ฟลูเทค จำกัด Flu-tech @flutech.co.th